User's Manual

ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 45 of 206
5.6.1 ATSC Settings
Click on the ATSC Settings button, highlighted in the next figure, to access the ATSC general settings.
Figure 16. ATSC Processing: ATSC Settings
Use the ATSC Settings page to select inputs, to set input/output RF channels, offset frequencies,
Frontend and Measure alarm thresholds and to manage Input Autoswitch functionality (refer to
Appendix A for further information).
Settings within this page will be used only in ATSC mode but will be saved and stored as mode specific
controls.