User's Manual

ISO 9001:2000 Cert. N°4500/1
Version 1.1 SDT_ARK6_User_Manual_ENG_vATSC Page 55 of 206
5.7.1 ITU Settings
Click on the ITU Settings button, highlighted in the next figure, to access the ITU general settings.
Figure 23. ITU Processing: ITU Settings
Use the ITU Settings page to select inputs, to set input/output RF channels, offset frequencies, Frontend
and Measure alarm thresholds and to manage Input Autoswitch functionality (refer to Appendix A for
further information).
Settings within this page will be used only in ITU mode but will be saved and stored as mode specific
controls.