Instructions / Assembly
STEP 1
STEP 3
STEP 2
STEP 4
STEP 5
How to Install a
Wood Screen Door
Gather Tools & Supplies
You will need measuring tape, a drill with a
Phillips Head bit, shims or something similar to
assist with holding the door during installation.
You may also need a circular saw if you need to
trim your door and your selected paint or
sealant and paint brush.
Install Hinges & Hardware
Refer to the instructions included with your selected hardware to complete you door
installation. If you have purchased Screen Tight hardware, please watch our installa
-
tion video to ensure proper mounting of the hinges. ScreenTight.com/Hardware
Set the door at on a solid surface and install the hinges at your marked locations.
Then install the hinge on the door jam. Screw the bottom hole on the top hinge rst,
use a level to make sure the door is straight, and then screw in the rest of the holes.
Shims or wedges can help you to hold the door in place.
ScreenTight.com
Trim Door as Needed
You can trim your door up to 3/8” from each
side and top and 1” off the bottom. A standard
circular saw will do the job. If you trim more
than these amounts you will compromise the
integrity of the door an void the warranty.
Determine Opening Size
Measure the width and height of your existing
opening inside the door frame to determine if
you need to trim your door. Allow a 1/8” space
on each side and 1/4” on the top and bottom.
Wood Door Sealing & Painting
All wood doors must be sealed or painted
before installation. Begin by simply unscrewing
the screen frames and prying them off the door
frame using a athead screwdriver. When
sealing or painting, be sure to cover all edges
top and bottom.
M
E
S
H
G
U
A
R
D
+
S
C
R
E
E
N
T
I
G
H
T
N
O
M
O
R
E
P
I
C
K
E
T
S
!
F
R
E
E
Y
O
U
R
P
O
R
C
H
•
S
C
R
E
E
N
T
I
G
H
T
.
C
O
M
N
O
M
O
R
E
P
I
C
K
E
T
S
!