U S ER M ANUAL Vital 200S Smart True HEPA Air Purifier Questions or Concerns? Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at (888) 726-8520.
Table of Contents Package Contents 2 Specifications 2 Safety Information 3 Getting to Know Your Smart Air Purifier 5 Controls & Display 6 Getting Started 7 Using Your Smart Air Purifier 10 About the Filter 15 Care & Maintenance 17 Troubleshooting 21 Warranty Information 25 Customer Support 26 Package Contents 1 x Smart Air Purifier 1 x Washable Pre-Filter (Pre-Installed) 1 x True HEPA / Activated Carbon Filter (Pre-Installed) 1 x User Manual 1 x Quick Start Guide 1 x AC Power Adapter Specifications Model
READ AND SAVE THESE INSTRUCTIONS SAFETY INFORMATION To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines. General Safety • • • • • • • • • • • • Only use your air purifier as described in this manual. Do not use without removing the plastic wrap from the filter. The air purifier will not filter air and may overheat, causing a fire hazard. Do not use your air purifier outdoors. Keep your air purifier away from water, and wet or damp areas.
SAFETY INFORMATION (CONT.) Power Adapter & Cord • • • • • • • • • Keep the air purifier near the outlet it is plugged into. Never place the cord near any heat source. Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances. Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over. This air purifier has a polarized plug (one blade is wider than the other).
G E T T I N G TO K N O W YO U R S M A R T A I R P U R I F I E R A. B. C. D. E. F. G. H. I. J. K. Check Filter Indicator Fan Speed Indicators On/Off Button Wi-Fi® Indicator Timer Indicators Display Lock Indicator Light Sensor Auto Mode Button Sleep Mode Button Fan Speed Button Air Quality Indicator H O L. M. N. O. P. Q. R. S. T. U.
C O N T R O L S & D I S P L AY Note: You can also use the VeSync app to control these functions, as well as additional app-only features (see page “VeSync App Functions” on page 13). Auto Mode Button • Turns Auto Mode on/off (see page 10). Sleep Mode Button • Turns Sleep Mode on/off (see page 10). • Press and hold for 3 seconds to reset the Check Filter Indicator. Check Filter Indicator • Lights up red when the filter should be checked (see Check Filter Indicator, page 17).
CONTROLS & DISPLAY (CONT.) Display Lock Button & Indicator • Prevents current settings from being changed (see page 12). Press and hold for 3 seconds to lock and unlock the display. G E T T I N G S TA R T E D 1. Place the air purifier on a flat, stable surface such as the floor. 2. Pull both sides of the front cover to remove it. [Figure 1.1] Note: Display Lock can also be controlled through the VeSync app.
GETTING STARTED (CONT.) 4. Remove the True HEPA / Activated Carbon Filter from inside the air purifier. 5. Remove the plastic packaging from the filter and place the filter and the pre-filter back into the air purifier. [Figure 1.3] 6. Place the front cover on the air purifier. Make sure to align the tabs on the cover with the slots on the bottom of the air purifier. [Figure 1.5] Figure 1.5 7. Insert the power adapter plug into the back of the air purifier. [Figure 1.6] Figure 1.
VeSync App Setup Note: The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions. 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. Wi-Fi Connection • To disconnect Wi-Fi, press and hold for 15 seconds until the Wi-Fi indicator turns off. This will restore the smart air purifier’s default settings and disconnect it from the VeSync app.
U S I N G YO U R S M A R T AIR PURIFIER Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features (see page 13). 1. Plug in and tap to turn on the air purifier. The fan will start on low. 2. Tap to change fan speed between low, medium, high, and turbo. Note: • • Auto Mode Auto Mode uses AirSight™, an infrared dust sensor inside the air purifier, to adjust the fan speed automatically based on air quality.
USING YOUR SMART AIR PURIFIER (CONT.) Light Detection You can turn on/off Light Detection in the VeSync app. When this mode is turned on, the light sensor will automatically adjust air purifier settings based on the amount of light in the room. • • The display will automatically turn off when the room gets dark. If the air purifier is in Auto Mode or Pet Mode, it will not use the high or turbo fan speeds, even if the air quality is poor, to avoid making too much noise.
USING YOUR SMART AIR PURIFIER (CONT.) Display Lock Memory Function When the air purifier is on, you can lock the display to prevent settings from being accidentally changed. Buttons will not respond to being tapped. When the air purifier is turned off and unplugged, it will remember its previous fan speed, Sleep Mode, Auto Mode, Pet Mode, and in-app Display and Light Detection settings. 1. Press and hold for 3 seconds to lock the display. The Display Lock Indicator will light up above the button.
USING YOUR SMART AIR PURIFIER (CONT.) VeSync App Functions The VeSync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available. Pet Mode • Pet Mode is efficient at filtering allergens from the air while conserving energy. • When Pet Mode is on, the air purifier runs for 15 minutes at high speed (3 indicator lights), then 60 minutes at medium speed (2 indicators), and cycles between the two fan speeds.
USING YOUR SMART AIR PURIFIER (CONT.) Auto Mode • Access additional auto modes: Quiet Auto Mode and Efficient Auto Mode. • Quiet Auto Mode uses the medium fan speed (2 indicator lights) instead of the high or turbo fan speeds, even when the air quality is poor, to avoid making too much noise. • Efficient Auto Mode lets you choose the size of the area you want to purify. The air purifier will use the turbo fan speed to clean the air for a designated amount of time.
A B O U T T H E F I LT E R The air purifier uses a 3-stage filtration system to purify air. A B A. Washable Pre-Filter • Captures large particles such as dust, lint, fibers, hair, and pet fur. • Maximizes the filter’s life by protecting it. • Removable and washable to increase filtering efficiency (see Cleaning the Pre-Filter, page 18).
ABOUT THE FILTER (CONT.) Clean Air Delivery Rate Humidity This air purifier has a Clean Air Delivery Rate of 245 cubic feet per minute (CFM), or 416 m³/h. Moisture may damage the filter. This air purifier should be used in an area with a humidity level 85% RH or below. If you use the air purifier in excessively humid areas, the surface of the filter may become moldy.
CARE & MAINTENANCE Cleaning the Smart Air Purifier • Unplug before cleaning. • Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry. • • Resetting the Check Filter Indicator Reset the Check Filter Indicator when: A. lights up. This is the Check Filter Indicator light. Vacuum the inside of the air purifier. • Replace the filter (see page 19). Do not clean with abrasive chemicals or flammable cleaning agents.
CARE & MAINTENANCE (CONT.) Cleaning the Pre-Filter 5. Rinse the pre-filter with water under a faucet. The Washable Pre-Filter should be cleaned every 2–4 weeks to increase efficiency and extend the life of your filter. You can set a reminder in the VeSync app to clean the pre-filter every 2, 3, or 4 weeks. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles. Optionally, you can wash the pre-filter with water and a mild detergent to remove dirt and dust. 6.
CARE & MAINTENANCE (CONT.) When Should I Replace the Filter? The True HEPA / Activated Carbon Filter should be replaced every 12 months. You may need to replace your filter earlier or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if the Check Filter Indicator is off. Replacing the Filter 1. 2. Push the pre-filter’s tabs inward and pull to remove the pre-filter.
CARE & MAINTENANCE (CONT.) Cleaning the Dust Sensor Regularly cleaning the AirSight™ Infrared Dust Sensor lens helps maintain the efficiency of the sensor. If the Air Quality Indicator is red (indicating “Bad” air quality) more than usual, you may need to clean your dust sensor. 4. Wipe the lens dry with a dry cotton swab. 5. Replace the dust sensor cover. Note: Do not remove the foam piece attached to the dust sensor cover unless instructed by Customer Support. [Figure 3.
T R O U B L E S H O OT I N G Problem Possible Solution Air purifier will not turn on or respond to button controls. Plug in the air purifier. Check to see if the power cord is damaged. If it is, stop using the air purifier and contact Customer Support (see page 26). Plug the air purifier into a different outlet. The air purifier may be malfunctioning. Contact Customer Support (see page 26). Airflow is significantly reduced.
TROUBLESHOOTING (CONT.) Problem Possible Solution Strange smell coming from the air purifier. Clean the filter, or replace if necessary. Contact Customer Support (see page 26). Make sure not to use your air purifier in an area with high humidity or while diffusing essential oils. Air Quality Indicator always stays blue, even when the air quality is poor. Clean the dust sensor lens (see page 20). Air Quality Indicator always stays red. Clean the dust sensor lens (see page 20).
V E S Y N C A P P T R O U B L E S H O OT I N G My smart air purifier isn’t connecting to the VeSync app. • Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device. • During the setup process, you must be on a secure 2.4GHz Wi-Fi® network. Confirm that the network is working correctly. • Make sure the Wi-Fi password you entered is correct. • There should be no spaces at the beginning or end of the password.
F E D E R A L C O M M U N I C AT I O N C O M M I S S I O N I N T E R F E R E N C E S TAT E M E N T – PA R T 1 5 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
WA R R A N T Y I N F O R M AT I O N Product Name Model Vital 200S Smart True HEPA Air Purifier LAP-V201S-WUS Date of Purchase Order ID Terms & Policy Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
C U S TO M E R S U P P O R T If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Distributed by Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@levoit.com Toll-Free: (888) 726-8520 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support.
/L EVOI T /L EVOI T /L EVOI T L IFE ST YL E /L EVOI T L IFE ST YL E /L EVOI T L IFE ST YL E L EVOI T.
MF091522RF-M1_0922LRF-V201-WUS
