Installation & Assembly

4
Secure the trellis by inserting two Cable Ties
through the Small Holes that are opposite
each other on the Legs. Connect the ties, pull
tight and then trim the ends of the Cable Ties.
(Note: The correct way to connect the Cable
Tie-See Below)
Connecting the Cable Tie Loop
Insert on flat side
6
5
Assemble both of the X’s to create the 8 leg Star.
(The X’s Pins pointed towards each other)
Remove the Short Tube from both of the X’s
and discard.
Follow this Step if your kit includes the Solar LED String lights
Wrap a string of lights on each leg
then proceed to Step 7 or 7a.
Once Frame is in the planted
container, position the Solar
panel towards the sun.
2/11/2020
2
Insert on
flat side
A
B
Remove contents from light package and unwind the bundle
the of light strings from the coil as a group.
Firmly hold each end of the group of light strings (note “A” and
“B” and Pull gently to stretch the bundle of lights strings straight.
A
B
Slide one string at a time from the bound end “A” to separate the
light strings, while holding the loose ends “B” together