Technical information

11
III Diving with Smart
UWATEC
®
Smart dive computers
English
III
1 Terminology / Symbols
The information on the display of Smart varies depending on the kind of dive and the dive phase.
For information about diving with microbubble levels (MB levels) see chapter
IV (-> 22).
1.1 General terminology / Display during no-stop phase
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
NO STOP
%
%
C
37 min. Dive time
Elapsed bottom time
No-stop time
24min
Current depth
26.2 m
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
No-stop phase
Dive phase during which surfacing is allowed
without stop
.
Time
Depth
Ascent rate
(Only while
ascending)
SPEED
%
Temperature
Current depth
In metres (feet)
Maximum depth
Maximum depth
reached during
the dive.
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min)
Oxygen toxicity
CNS O
2
%
Dive time
Duration of
the dive (min)
O2% Mix
Selected oxygen
fraction
Maximum depth
TANK DATA
RBT
bar
Remaining Bottom Time, RBT
COM
Tank pressure
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
CNS O
2
%
m
DECO
STOP
%
%
C
Deepest decompression
stop depth
Total ascent time to surface (7 min)
2 min
Decompression
stop duration
6 m
35.7 m
Decompression rangeNo-stop range
3 m
Time
Depth
Decompression
stop depth
Deepest stage is
displayed.
Decompression
stop duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
Total ascent time
Including decompression
stops in minutes.
Decompression stop
All required decompression
stops must be observed.
TANK DATA
RBT
bar
Remaining Bottom Time, RBT
Maximum remaining time at current
depth including all decompression
obligations (minutes).
COM
Tank pressure
TANK DATA
bar
COM
RBT 21 min
1.2 Display during decompression phase / Remaining Bottom Time (RBT)