Technical information

26
4 Functions during the dive with microbubble levels
UWATEC
®
Smart dive computers
4.4 Level stop and deco stop
When the level stop depth equals the
depth of the first obligatory decom
-
pression stop and if you are within
1.5m/5feet of the stop depth itself,
Smart shows
DECOSTOP
and
LEVELSTOP
.
The indicated duration refers to level
stop duration.
Since level stops are more restrictive
than decompression stops, when all
decompression obligations have been
observed the display changes from
DECOSTOP
LEVELSTOP
to
LEVELSTOP
only.
Microbubble level
L0
L5
L0
L5
3m/10ft
Deco stop
duration
Level stop duration
Depth
Time
LEVELSTOP
LEVELSTOP
ft
ft
Level stop duration
Decompression
stop depth =
level stop depth
5 Complete a dive with MB levels
A dive with MB levels is completed the same way as a dive without MB levels
(L0) (-> 20), save for the following exceptions:
If the MB level has been reduced during the dive, Smart will display a flashing
MB level symbol and the current MB level for five minutes after reaching the
surface. The dive is then completed and Smart changes to user mode with the
MB level switching back to the original MB setting.
Repetitive dives and microbubble levels:
if during a dive a level stop is being
ignored and the diver starts another descent shortly afterwards, Smart might
immediately request level stops. To complete the dive with the initially set MB
level all level stops must be observed.
DIVE TIME
DEPTH
DECO INFO
MAX.DEPTH
C