User's Manual

ENGLISH – Instructions manual
Bluetooth Headphones – E20.30L
Product specications :
Size : 20cm x 17,5cm x 4 cm
Weight : 190 g
Material : ABS/PU - Rubber with antibacterial treatment
FM radio function
Charging time : 2 hours
Working time : 5 hours
Wireless maximum distance : 10 m
1) Operation instruction for Bluetooth mode
ON/OFF
1. Long press ON/OFF button for 3 seconds.
2. Blue light will turn on while Bluetooth entered into pairing mode.
3. On the mobile device, turn on the Bluetooth connection.
4. Select “E20” in the available Wireless devices on your mobile device.
5. To turn o the headphones, long press ON/OFF button for 3 seconds. (in case
the battery voltage is too low, the red light will icker and the headphones will
shut down).
PLAY/PAUSE
When the Bluetooth headphones are connected to the mobile’s stereo, press
shortly on the ON/OFF button in order to pause the music. Shortly press on the
ON/OFF button in order to play the music again.
NEXT/VOLUME UP
When the MP3 is on, shortly press on the « + » button in order to listen to the
next song.
Long press on the « + » will turn the volume up.
BACK/VOLUME DOWN
When the MP3 is on, shortly press on the « - » button in order to listen to the
previous song.
Long press on the « - » will turn the volume down.
ANSWER/HANG-UP/REDIAL
Press on the CALL button in order to take call. Press again on the CALL button
in order to hang-up.
While in Bluetooth mode, press twice CALL button will dial the last number.
If taking a call while listening to music, the music will be paused automatically
and will be resumed after ending the call.
2) Operation instructions on MP3 mode
- In « Power-on », insert the TF card, MP3 will play automatically (blue light will
icker slowly).
- In « Bluetooth mode », short press on the FM/MP3 button in order to switch to
MP3 mode.
3) Operation instructions for FM radio
Long press on the FM/MP3 button to switch to radio.
Please perform « auto search » before listening to the radio by short press on
the ON/OFF button.
4) Insert the « aux cable » to the headphones interface in order to listen to
music when the headphones are in OFF position.
5) Charging
Before using the headphones for the rst time, please make sure you charge
the Headphoneq fully using the charging cable.
6) Package content
1 Wireless heaphones
1 USB charging cable
1 aux cable
1 user manual
1 Polyester transport pouch
Warning !
Adjust the sound of this headset with a suitable volume
To avoid possible hearing damage, do not listen high volume for a long time.
Never use this headphone when traveling on a bicycle, motorcycle or other
motorized vehicle. When using this headset outdoors, make sure that the
sound does not prevent you from hearing the external sounds and does not
put you in danger
Keep the product dry ; do not place the product in damp places.
Keep out of direct sunlight and high temperatures High temperatures may
result in damage.
Keep out of cold temperatures, this will help avoid internal damage.
Do not disassemble the product.
Avoid dropping the headphones.
Do not continue to charge the headphones over 5 hours.
This product complies with European Directive 2002/96 / EC on waste
electronic and electronic equipment (WEEE) and 2011/65 / EU & 2015/863/EU
on the use of certain hazardous substances in electrical and electronic
equipment (RoHS).
Importé par SCX Design
74 avenue de Villiers
75017 Paris - France
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.