User's Manual
1
2 3
1
2
3
4
5
6
Power / Pairing / Charging Indicator
“ – “ Button (Volume Down / Skip Track Reverse)
“MFB” Multi-Function Button
(Power On /O, Pairing, Answer / End Calls)
“ + “ Button (Volume Up / Skip Track Forward)
Microphone
USB Charging Port (Water-Resistant Cover)
Funcon
Turn Ear buds 'On'
Enter Pairing Mode
Pairing
Play / Pause
Skip to next track
Skip to beginning of current track
Skip to beginning of previous track
Increase volume
Decrease volume
Answer an incoming phone call
Decline an incoming phone call
End a call
Transfer a call between the
phone and the ear buds
Last number redial
Turn ear buds ‘O’
Clear the paired device list
(Factory Reset)
Acon Required
When Ear Buds are 'O’, press and hold the MFB for 2 seconds until you hear the
4 ascending beep tones. The LED indicator ashes blue.
When Ear Buds are 'O', press and hold the MFB for 4 seconds until you see the
LED indicator alternately ashing red and blue.
Make sure your Bluetooth device is 'On' and discoverable. When
“iHome iB80” appears on your device’s menu, select it to complete pairing.
Short press the MFB to start playback. Short press to pause playback.
Short press to resume playback.
Short press the "+" button during playback
Short press the " - " button during playback
Short press the " - " button twice during playback
Press and hold the "+" button during playback
Press and hold the " - " button during playback
Short press the MFB when you hear the incoming ring sound. NOTE: Music will
automatically pause when you are answering a call and resume when you end the call.
Press and hold the MFB for 1 - 2 seconds to decline the incoming call.
Short press the MFB to end the call and 'hang up'.
While the call is in progress double press the MFB to transfer the call between
the phone and the ear buds.
When phone is paired with ear buds but no call is in progress, double press the
MFB to redial the last number.
Press and hold the MFB for 2 seconds until you hear the 4 descending beep tones.
The LED indicator turns red and then shuts o.
Press and hold the MFB and the " - " buttons together for 5 seconds to clear
the paired device list. All previously paired devices will be disconnected.
USB Charging Cable x 1
Silicon Ear Cushions
L
x 2
SIZE
M
x 2
SIZE
S
x 2
SIZE
Drawstring Travel
Pouch
x 1
What’s Included
Model: iB80
IB English (Front)
Color: 1 C + 1C - Black text on white paper
Size: 270 W x 270 H (mm)
Date: Apr. 08, 2016
Introduction
Your new iHome FIT Bluetooth stereo ear buds are designed to link with your Bluetooth
enabled smartphone or music player to allow you to wirelessly listen to music and answer
phone calls within the normal 10 meter (33 feet) Bluetooth operating range.
Your ear buds are supplied with 3 sizes of ear cushions for maximum wearing comfort and
stability during all kinds of exercise and physical activities. They are also rated as IPX3 for
splash resistance so you may use them in the rain without causing any damage, but please
note that they are not designed for use while swimming and they should not be submerged
in water.
Please review this manual carefully to make sure you are getting the maximum benet from
all of the features of your new ear buds, and keep this manual for future reference.
Lithium-ion Battery
iB80
User Manual
Water-Resistant Wireless Sport Earbuds
mic+remote • flexible neckband • noise isolating
PREPARATION FOR USE
1. Location of Controls and Indicators
OPERATING INSTRUCTIONS
1. Power On / Auto-Linking Mode
2. Power Off
To shut the power ‘O’ at any time PRESS and HOLD the Multi-Function Button (MFB) on
the control dongle for approximately 2 seconds. You will hear four descending beep
tones, the red LED ashes once and then the power shuts o.
4. Using Your iHome FIT Bluetooth Ear buds
The chart on Page 3 explains the basic functions and operations of your Bluetooth ear
buds.
3. Manually Pairing Your iHome FIT Ear buds With Your Bluetooth Device
NOTE: Your ear buds must be ‘O’’ to begin the manual pairing process.
With the ear buds in the ‘O’ mode, PRESS and HOLD the Multi-Function Button (MFB)
on the control dongle for approximately 4 seconds until you see the LED indicator
alternately ashing blue and red. Release the Multi-Function Button (MFB)
Make sure that your Bluetooth device is turned ‘On’ and in the Pairing mode. Refer to the
instructions supplied with your device if necessary. When your device “nds” the iB80
ear buds, you will see “iHome iB80” appear on your devices Bluetooth menu screen
together with the words “Not Paired”, “Not Connected” or similar. Touch “iHome iB80” to
complete the pairing process. You will hear a single beep, and you will see “iHome iB80
Connected” on your devices Bluetooth menu. NOTE: If your Bluetooth device asks for a
Password or a PIN to complete the pairing process, enter “0000” on the keypad of your
device.
You are now ready to begin streaming music wirelessly from your Bluetooth device to
your iHome iB80 Bluetooth ear buds.
PRESS and HOLD the Multi-Function Button (MFB) on the right ear-piece for
approximately 2 seconds until you hear the four ascending beep tones that indicate the
power is ‘On’. The blue LED begins ashing slowly indicating that your ear buds are in
the Auto-Linking Mode and trying to re-link to a previously paired device as long as that
device is within the normal pairing range of approximately 33-feet. If your ear buds do
not nd a previously paired device that is in range and turned ‘on’ within 3 minutes they
will switch from the Auto-Linking mode to the Power ‘O’ mode to extend the battery
life.
2. Charging Your Ear buds
Your ear buds are powered by a rechargeable lithium-ion battery. Although the battery
was fully charged when the ear buds left our factory, like all batteries it can lose power
even during periods of non-use. We recommend that you charge the ear buds for 3
hours before rst use to make sure the battery is fully charged before you start using
your ear buds.
To charge the battery, open the water resistant cover and connect the smaller plug on
the supplied USB charging cable to the USB charging port on
the ear buds. Refer to the illustration. Please note that the
plug can only be inserted into the charging port one way. To
avoid damaging the charging port make sure that you are
inserting the plug correctly. Connect the larger plug of the
supplied USB charging cable to a USB/AC adapter (not
included) or to the powered USB port on a laptop or personal
computer.
The LED indicator will glow red when your ear buds are
charging and will turn ‘O’ when your ear buds are fully
charged.
Note: Noise isolation ear buds such as the iB80 are designed to block background
sounds so that you can enjoy your music without extraneous noise. You should not use
noise isolation ear buds like the iB80 in situations that require you to hear and be aware
of warning sounds.
Note: In extremely cold weather you might feel a slight tingling sensation in your ears
when wearing noise isolation ear buds. This is caused by a build-up of static electricity
in your body and not an indication of any problem with your ear buds.
3. Wearing Your Ear Buds
The two ear-pieces are marked ‘L’ and ‘R’. When worn properly the neckband will be
positioned behind your neck and the controls will be on your right side.
The ‘M’ size tips were installed on the ear buds at our factory. If
you wish to change to either the ‘S’ or ‘L’ size tips, simply pull
the ‘M’ size tips o the ear-pieces and push the ‘S’ or ‘L’ size tips
on to the tubes, making sure that they are rmly seated on
the tubes so that the tips do not come o when you remove
the ear-pieces from your ears. Refer to illustration.
1
4
3
6
2
5
Internal Rechargeable Lithium-ion Battery
This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the
device. If you suspect your battery may be dead, try charging it several times. If the battery does not
recharge, please contact
Customer Service at 1-800-288-2792.
WARNING/DISPOSAL OF UNIT
Please do NOT attempt to change the battery yourself. Doing so may damage the unit and will void
the warranty. If discarding, follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic
substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community
regulations that apply to the disposal of batteries/electronics. If there are no local regulations
concerning battery/electronics disposal, please dispose of the device in a waste bin for electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no charge.
Check to see which ones in your area do so.
CAUTION:
The battery used in this device may present a risk of re, explosion or chemical burn if mistreated.
• Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way
abnormal.
• Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline
solution or other electrolytic substance.
• Always conrm that the temperature is 5°C - 35°C (41° - 95° Fahrenheit) before you charge the
battery. Leakage or deterioration of the battery may occur if this warning is not heeded.
• Never expose the battery to any liquid.
• Never expose the battery to excessive heat such as direct sunlight or re. Never use the battery
pack in an unventilated vehicle where excessive internal temperatures may be encountered.
• Always keep the battery out of the reach of infants and small children.
CHARGE
BEFORE
USE
BC
iB80 Neckband style
stereo ear buds
Right
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1)
this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Limited One-Year Warranty Information
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this
product to be free from defects in workmanship and materials, under normal use and conditions, for
a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to rst return it to the store
where it was originally purchased. Should this fail to resolve the matter and service still be required
by reason of any defect or malfunction during the warranty period, SDI will repair or, at its discretion,
replace this product without charge. This decision is subject to verication of the defect
or
malfunction upon delivery of this product to the Factory Service Center authorized by Customer Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return
Authorization Number and shipping instructions.
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It
does not cover (i) products which have been damaged by negligence or willful actions, misuse or
accident, or which have been modied or repaired by unauthorized persons; (ii) cracked or broken
cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its
return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI or any of its aliates, contractors,
resellers, their ocers, directors, shareholders, members or agents be liable to you or any third party
for any consequential or incidental damages, any lost prots, actual, exemplary or punitive damages.
(Some states do not allow limitations on implied warranties or exclusion of consequential damages,
so these restrictions may not apply to you.) This warranty gives you specic legal rights, and you may
also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,
cashier's check, or credit card) for purchase of your SDI product.
© 2016 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
• Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC ID: EMOIB80 IC: 986B-IB80 Declaration ID D028781
FCC/IC Information
iB80-040816-A (EN) Printed in China