User's Manual

Setting and Using FM Presets

The unit allows you to store up to 6 FM radio station presets

1. Press the Button on the unit to turn it on.

2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio

frequency appear on the display.

3. Press and release the Presets Button as needed until the preset number (P1- P6) you wish to set is

displayed, then press and hold the Presets Button to enter setting mode.

4. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station).

5. Press and release the Presets Button to confirm. 2 beeps will sound to confirm the preset has been

assigned. Continue steps 3 - 5 until you have set up to 6 preset stations.

6. To listen to a preset FM station at any time, follow steps 1 - 3 to turn on FM radio mode and cycle to

the desired preset. NOTE: If no Bluetooth device is linked/paired, pressing the Presets Button when

the unit is OFF will turn the unit ON in the last active mode.

Using FM Radio in Other Countries

Different areas of the world use different FM frequency steps and ranges. By default, this unit is set

to USA frequency steps. To use the radio outside the USA:

1. Make sure unit is OFF.

2. Press and hold the Mode Button until “USA” flashes in the display.

3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA.

4. Press the Mode Button again to exit frequency setting mode. 2 beeps will confirm setting.

Using the iBN180

P10