User's Manual

Using the iBN180

Pairing Your Device

Using Standard Bluetooth

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user

manual.

2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes

on the display and a beep sounds, indicating pairing attempt. “iHome iBN180” should appear on

your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome

iBN180” on the device to connect it. If your device asks for a password, enter 1234 on the keyboard

of your device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its

previous mode. To retry pairing, turn the unit OFF then back ON, then follow step 2 again.

Once paired with a device, the

Bluetooth indicator on the display will stop flashing then the Bluetooth

icon will remain.

On some devices, you must then select “Use as Audio Device” or similar on the device’s

Bluetooth menu. Once paired, your device should link to the iBN180 whenever within range (about 30

feet).

Pairing with a Different Device

When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long

as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.

P14

Oct 03, 2013