User's Manual

Unit doesn’t respond

• Check that all connections are correct and properly plugged in.

• Only use the AC adaptor that came with the unit

• Make sure your device is properly paired with the iBN180.

• Make sure the Power is ON.

Unit doesn’t respond (locked up or frozen)

• The unit may need to be reset. To do so, unplug the unit from power source and remove the

backup batteries. Let unit stand for 2 minutes. Re-install backup batteries and connect unit to power

source. You will need to reset the clock, radio, and any other settings.

Reset/clear paired Bluetooth devices from unit

• To clear all paired Bluetooth devices from the unit, press and hold the Pairing Button on the back of the

unit for 10 seconds.

Trouble pairing device/computer with iBN180

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see

www.ihome.com/support for updates on pairing.

• When you power ON the unit, it will automatically link with the last previously paired Bluetooth

device if the device is still within range (about 30 feet). To pair with a different device you must turn

off Bluetooth capability on the already paired device, or take it out of range.

• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing

and linking.

For further information and to see the latest instructions, visit www.ihome.com/support

Troubleshooting

P17