iBN18 Eng IB Size: 153mm x 120mm Printing color: Black Nov 04, 2013 P1 iBN18 NFC Bluetooth Dual Alarm Clock with USB Charging instruction manual
P2 iBN18 Introduction Thank you for purchasing the iHome iBN18. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
P3 11/04/2013 iBN18 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID: EMOIBN180 IC: 986B-IBN180 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P4 iBN18 Table of Contents Meet Your iBN18.............................................................................................................5 The Display/Setting Up the Unit ..........................................................................................6 Installing/Replacing Backup Batteries ..................................................................................7 Setting the Clock ............................................................................................
P5 iBN18 Included • iBN18 system • 100V-240V universal AC adaptor • 12 inch audio cable ALM .
P6 Meet Your iBN18 iBN18 Top Bottom NFC Antenna Sleep Button Mode Button Power/Alarm Reset Button CAN ICES-3 (B)/NMB-3(B) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P7 Using the The Display Bluetooth Audio Indicator AM/PM Indicators iBN18 Time Display Bluetooth Pairing Indicator Alarm Active Indicators Low Backup Battery Indicator DST Mode Indicator Sleep Mode Indicator Mode/Wake to Alarm Source Indicators: Tone, Bluetooth device, Aux in device Setting Up the Unit Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet. To turn unit on press and release the Button.
P8 Replacing and Installing Clock Backup Batteries Using the iBN18 Note: 2 AAA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P9 Using the Setting the Clock iBN18 The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the DST Switch to +1if Daylight Saving Time is in effect or to -1 if Standard Time is in effect. 1. Press and hold the Clock Button for 2 seconds until the clock display flashes and a beep sounds. 2.
P10 Using the Setting and Using the Alarms iBN18 This unit has 2 separate alarms, each set the same way. Below we explain how to set Alarm 1. To set alarm 2, follow the same steps using the Alarm 2 Button. Note: each step must be completed while display is flashing or step will time-out with any changes saved. 1. Press and hold the Alarm 1 Button for 2 seconds until the time display and alarm icon flash, and a beep sounds. 2.
P11 Using the Previewing Alarms and Turning Alarms On/Off iBN18 1. Press and release the Alarm Button to view the current alarm time. 2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm icon. Snooze/Dimmer Button 1. To program Snooze, press and hold the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes). 3.
P12 Using Bluetooth: Pairing and Playing Your Device Using NFC Using the iBN18 This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play instantly. For pairing non-NFC devices, please see the following section “Pairing Your Device Using Standard Bluetooth”. 1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on both Bluetooth capability and NFC capability as described in the device’s user manual. 2. Place your NFC–enabled device in play mode. 3.
P13 Using the iBN18 Pairing Your Device Using Standard Bluetooth 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes on the display and a beep sounds, indicating pairing attempt. “iHome iBN18” should appear on your device’s menu.
P14 Using the iBN18 Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth indicator icon appears on the display. 3. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. The Bluetooth wave icons will appear, indicating Bluetooth streaming mode. 4. Press the – or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6.
P15 Using the iBN18 Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it.
P16 Troubleshooting Unit doesn’t respond • • • • Check that all connections are correct and properly plugged in. Only use the AC adaptor that came with the unit Make sure your device is properly paired with the iBN18. Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup batteries. Let unit stand for 2 minutes. Re-install backup batteries and connect unit to power source.
P17 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P18 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
