User's Manual

Using the iBN18
Pairing Your Device
Using Standard Bluetooth
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user
manual.
2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes
on the display and a beep sounds, indicating pairing attempt. “iHome iBN18” should appear on your
device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBN18”
on the device to connect it. If your device asks for a password, enter 1234 on the keyboard of your
device. If no device is paired within 2 minutes, a tone will sound and the unit will revert to its previous
mode. To retry pairing, turn the unit OFF then back ON, then follow step 2 again.
3.
Once paired with a device, the Bluetooth indicator on the display will stop flashing then the Bluetooth
icon will remain.
On some devices, you must then select “Use as Audio Device” or similar on the device’s
Bluetooth menu. Once paired, your device should link to the iBN18 whenever within range (about 30
feet).
Pairing with a Different Device
When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long
as that device is still within range (about 30 feet). To pair with a different device follow steps 1-2.
12
P13