Model: iBN350 NFC Bluetooth Stereo Dual Alarm Clock with Dual Wireless USB Charging QUESTIONS? Visit www.ihome.
W E L C O M E Thank you for choosing the iBN350 from iHome. This user guide will get you up and running quickly and provide helpful hints to maximize enjoyment. For more information about this and other iHome products, please visit www.ihome.com G E T T I N G S T A R T E D This unit ships with the following items. Please check to see that all items are present.
F E A T U R E S & F U N C T I O N S Top panel Wireless charging pad NFC charging area (on right side of unit) Talk/End Call Button Mode Button Power On/Off Button Play/Pause Button Volume Control Buttons Alarm 1/Alarm 2 Buttons tal Sleep Button p a ir i n g k / e nd Snooze/Dimmer Button +/– Settings Buttons Bluetooth Pairing Button Back panel DC jack DC Display Aux-in jack 9V 3A USB charging port DST Switch Clock Button Time Display AM Indicator PM Indicator Low Backup Battery Indica
CONNECTING AC ADAPTER This unit operates on AC power DC 9V 3A RESET R ESET TEST T EST using the included 100V-240V universal AC adaptor. Place unit on a stable surface. Plug the power adaptor into the DC jack on back of the unit and the other end into a working wall socket. The Power Button will glow red. B A C K U P verify adaptor type B A T T E R Y The iBN350 ships with a CR2450 battery installed for backup to provide continuous alarm operation and clock settings in the event of a power failure.
B AC K U P B AT T E R Y ( C O N T I N U E D ) 1. Please make sure the AC adaptor is connected. Otherwise all settings may be lost during battery replacement. 2. Use a Phillips screwdriver to open the backup battery compartment door located on the bottom of the unit. 3. Remove the exhausted battery. Insert a new CR2450 battery by easing it under the tabs in the battery well and pressing down. Make sure the side marked + is facing up. 4. Close the battery compartment door and tighten the battery door screw.
SETTING THE TIME 1. Press and hold the Clock Button. The TIME will flash on the display. Press the + or – Buttons to set the correct time (hold for rapid adjustment). Make sure to set the correct AM or PM time. (The PM/AM indicators appear to the left of the time display.) NOTE: The display can be set to standard 12 hour time (AM and PM) or to 24 hour time. To toggle between 12 and 24 modes, press and release the Alarm 1 or Alarm 2 Button at any time while display is flashing during time setting mode. 3.
SETTING AND USING THE ALARMS SETTING THE ALARMS This unit has two alarms which are set the same way. Instructions below are for setting alarm 1. Substitute the Alarm 2 Button to set alarm 2. You can wake to your Bluetooth device or to the built-in tones. The alarm will sound for 60 minutes or until reset/turned off. 1. Press and hold the Alarm Button until the alarm time display flashes and one beep sounds. 2.
SETTING AND USING THE ALARMS (C o n t i n u e d ) REVIEWING, ARMING/DISARMING AND RESETTING THE ALARM Press and release the Alarm Button at any time to review the current alarm settings. To toggle the alarm on or off, press the Alarm Button as needed. When the alarm icon is displayed, the alarm is armed/on. Press the Power Button or Alarm Button when the alarm is sounding to reset it to come on again at the same time the next scheduled day.
US ING W I R EL ESS C HA R GIN G This unit supports Qi wireless charging; PMA wireless charging is not supported. Wireless charging is only for compatible devices. Remove metal case from device before charging. Do not place metal or magnetic-striped objects on the charger. Doing so could damage the object or this unit. Center Qi compatible device with back side down on marked charging target circle. Check the wireless charging indicator toward the bottom left of the display.
USING BLUETOOTH Pai ri n g Yo u r D ev i ce U s in g NFC Pairing is the set-up process to introduce your Bluetooth-capable device to the iBN350. Once your device is paired, the iBN350 can recognize it and you can play your audio through it. This device features wireless NFC pairing, which allows playing NFC-enabled devices to play and pair instantly. For non-NFC devices, please see the following section “Pairing Your Device Using Standard Bluetooth.” 1.
USING B LU ETOOTH (Conti nued) L iste n i n g to B l u e to o t h Aud io 1. Press and release the Power Button to turn on the unit, then press and release the Mode Button as needed to cycle through BT and AUX modes. 2. When BT mode is selected, press the + or – Buttons to navigate to the desired tracks. Press and hold to search within the current track. Adjust the volume on your BT device to maximum output. 4. Press the the or Button on the unit to adjust the system volume.
LI ST E NI N G TO AUX D E VIC E S 1. Connect a standard audio cable with 3.5mm plug to the headphone or line-out jack on your AUX device and the other end to the AUX IN jack located on the back of the iBN350. 2. Press and release the Power Button to turn on the unit, then press and release the Mode Button as needed to cycle through BT and AUX modes. 3. When AUX mode is selected, turn on your AUX device and use its controls to play, pause and navigate audio tracks.
T R O U B L E S H O O T I N G Symptom Possible reason Solution Unit won’t turn on AC adaptor isn't plugged into a working wall socket or not plugged into the power jack on back of the unit Plug the AC adaptor into a working wall socket and plug the connector into the supply jack on the unit. Make sure any associated wall switch that controls the outlet is ON.
I M P O R TA N T S A F E T Y T I P S When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
I M P O R TA N T S A F E T Y T I P S (CONTINUED) 12. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. 13.
LIMITED 1 YEAR WA R R A N T Y iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
