User's Manual

Pairing Your Device Manually

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s

user manual.

2. Press the Power Button to turn the unit ON.

3. Press and release the Mode Button as needed until “BLUETOOTH” appears on the display.

4. Press and hold the Nap/Pairing Button on the top of the unit for 2 seconds to begin pairing the unit

with your device. The Bluetooth icon will flash on the display, indicating pairing attempt. “iHome

iBN43” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message

appears on your device, select “iHome iBN43” on the device to connect it. If your device asks for a

password, enter 1234 on device’s keypad.

If no device is paired within 3 minute, a tone will sound and the unit will revert to its previous mode.

To retry pairing, turn the unit OFF then back ON, then follow steps 2 - 4 again.

Once paired with a device, the

Bluetooth indicator on the display will stop flashing but the Bluetooth

icon will remain.

On some devices, you must then select “Use as Audio Device” or similar on the

device’s Bluetooth menu. Once paired, your device should link to the iBN43 whenever within range.

iBN43

Using the

P14

For iPhone

iHome iBN43 iHome iBN43

iHome iBN43

For other