Model: iBT175 Rechargeable Bluetooth Color Changing Speaker CHARGE BEFORE USE instruction manual Questions? Contact Customer Service at 1-800-288-2792
iBT175 Introduction Thank you for purchasing the iHome iBT175. This product is designed to provide high quality wireless sound for your Bluetooth audio device, colored lighting to set the mood and a disco dome to create a total sight and sound experience. This instruction booklet explains the basic operation and care of the unit. Please read carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
iBT175 Table of Contents Introduction/Maintenance .........................................................................................................................................................1 Table of Contents..........................................................................................................................................................................2 Included ...........................................................................................................
iBT175 Included • iBT175 unit • Aux-in cable • Universal 100V-240V AC adapter iBT175 Universal 100V-240V AC adapter Aux-in cable 3
iBT175 Meet Your iBT175 Front Panel Controls Talk/End/ Pairing Button Power Button Color Change Button Play/Pause Button Disco Dome Button Battery Check Button Raise Volume Button Lower Volume Button Red Charging Status Indicator Located under grille Blue Power/Bluetooth Status Indicator Back Panel Aux-in Jack DC jack Reset port 4
Using the iBT175 Connecting & Charging the Unit CHARGE UNIT BEFORE PORTABLE USE Connect the included AC adapter to the DC jack located on the back of the unit and connect the other end to a working wall outlet. The red charging status indicator blinks while the unit is charging For first time portable use, charge unit for about 5 hours. To review the battery status of the unit, press and hold the Battery Level Button. The voice prompt will announce the current battery level.
Using the iBT175 Reviewing Battery Charge Level in Portable Mode (AC adapter is disconnected and unit is ON) 1. Press and hold the Battery Level Button when unit is ON but not charging (AC adapter is not connected) to enter Battery Review Mode. The built in voice will announce the current battery level. Pairing Your Device Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT175. Once your device is paired, the iBT175 can recognize it and you can play your audio through it. 1.
Using the iBT175 Manual Pairing To pair with a different device or at a different time: 1. Make sure unit is powered on. 2. Press and hold the Talk/End/Bluetooth Pairing Button for 2 seconds. 3. Select “iHome iBT175” on device to pair.
Using the iBT175 Playing Audio Via Bluetooth Once the iBT175 is paired to a device, it will attempt to autolink when the unit is turned on and the device is within range (about 33 feet). If there is no audio signal for 15 minutes (Bluetooth or Aux), the unit will power off to save battery life (except in color change and lantern modes). 1. Press and hold the Power Button for 2 seconds to turn on the unit.
Using the iBT175 Playing Audio via Aux In 1. Connect one end of a standard stereo audio cable to the Aux-in jack on the side of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. Press and hold the Power Button for 2 seconds on the unit to turn it on. 3. Power on the aux audio device and use the controls on the device to play or pause audio, and to navigate tracks. Make sure to pause any connected Bluetooth device to hear aux audio. 4.
Using the iBT175 Color Change Mode 1. Press and hold the 2. Press the Power Button for 2 seconds to turn unit on.
Using the iBT175 Disco Dome Mode This unit has a “disco” mode which projects swirling colored lights upwards towards the ceiling. DO NOT LOOK DIRECTLY INTO THE DISCO LIGHT. 1. Press and hold the 2. Press the Power Button for 2 seconds to turn unit on. Disco Dome Button to turn disco mode ON or OFF.
Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
iBT175 FCC Information FCC Radiation Exposure Statement FCC ID:EMOIBT175 IC:986B-IBT175 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT175. Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) If the unit does not respond, try resetting the unit. Insert a paperclip or similar into the Reset port located on back of the unit for a few seconds. Note that doing so will clear settings.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
