Instruction Manual

Playing Audio Via Bluetooth

1. Press the Button to turn on the unit. The Bluetooth icon will be displayed when a linked device is

in range and detected. You can then listen to audio streamed wirelessly from your paired iPad,

iPhone, iPod or other Bluetooth device.

2. Press the Button to play audio from your device. Press again to pause play and once more to

resume play. When Bluetooth audio is active, the audio icon will be displayed around the Bluetooth

icon .

3. Press the – or + Button to navigate tracks on your device.

4. Press the or Button to adjust the system volume. You can also adjust volume on your device.

5. When done listening, press the Button to turn the unit OFF. Remember to turn off your device,

too.

Remote Power On Via Bluetooth

When within range (about 30 feet) of the unit, your previously paired device will autolink to the unit.

Pressing play on your device will remotely power on the unit and in a few moments your audio will

play through the unit at the current set volume. On some devices, alert sounds from the device will

also be transmitted.

Pairing with a Different Device

1. When you power ON the speaker, it will automatically link with the previously paired Bluetooth

device as long as that device is still within range (approx. 30 feet). To pair with a different device

follow steps 1 - 4 under ”Pairing Your Device” on previous page.

P13