User's Manual

Setting the Clock

1. Press and hold the Sleep/Clock Adjust Button for 2 seconds until the clock display

flashes and a beep sounds.

2. Press the or Buttons to adjust the clock to the current time (hold for rapid setting).

Make sure you set the correct AM/PM time. The AM and PM indicators appear to the

left of the display.

3. Press the Sleep/Clock Adjust Button to confirm the time. The year will flash on the display.

4. Press the or Buttons to adjust the clock to the current year (hold for rapid setting).

5. Press the Sleep/Clock Adjust Button to confirm the year. The date and month will flash on the display.

6. Press the or Buttons to adjust the clock to the current date and month (hold for

rapid setting).

7. Press the Sleep/Clock Adjust Button to confirm the date and month rand exit clock setting mode. 2

beeps will confirm clock setting is complete..

TIP: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display,

press the Alarm Button or Alarm Button while the display is flashing during clock setting.

Setting and Using the Alarms

This unit features dual alarms which can be set to different times and alarm sources. Each is set in the

same way. Instructions are given as “Alarm Button”; use Alarm Button or Alarm Button to set

respective alarms.

Note: Each step must be completed while display is flashing or step will time-out with any changes saved.

Using the iBT230