User's Manual

5. If pairing is successful, 2 beeps will sound and the Bluetooth Button will glow solid green

indicating the iBT232 is ready to play music. There should also be an indication on your

device. If no device is successfully paired within 3 minutes the iBT232 will default to

previous mode. Once the iBT232 is paired to a device, it will attempt to autolink when

the device is within range (about 33 feet).

P12

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT232. to a

previously paired device. Once your device is paired, the iBT232 can recognize it and you

can play your audio through it. For manual pairing, follow steps below.

1. Turn on your Bluetooth device and make it “discoverable” by turning

on Bluetooth mode (check in Options or Settings).

2. Press the Bluetooth Button to turn on the unit in Bluetooth mode,

indicated by “bt” on the display and the Bluetooth Button lighting up

green.

3. Press and hold the Bluetooth Button for 2 seconds. “PAIR” will

flash on the display, indicating the iBT232 is in pairing mode.

4. “iHome iBT232” should appear in your device’s Bluetooth menu. Select

“iHome iBT232” to connect it. If prompted for a passcode, enter “1234” on

your device’s keypad.

Using the iBT232

Pairing Your Bluetooth Device

iHome iBT232