User's Manual

13
Playing your Aux Audio Device
1. Connect one end of a standard stereo aux audio cable to the aux jack on the back of the unit and
connect the other end to the headphone jack or aux-out jack on your audio device.
2. Press and release the Mode Button as needed to put the unit in Aux-in mode.
3. Use controls on your device to play and pause audio and to navigate tracks and menus.
4. Press the or Button to adjust the unit volume.
5. To turn off the unit, press and release the Button. Make sure to turn off your audio device, too.
Charging a Device with the USB Port
A 1 Amp USB port is located on the back of the unit for
charging devices while the unit is connected to AC power.
Connect one end of a compatible USB cable (not included)
into the standard USB port on the unit and the other end into
the device you wish to charge. Some devices require
proprietary USB charging ports or cables. Monitor the
charging status of your device. If the device does not charge,
you will need to use the charger that came with your device.
Using the iBT280
NOTE: Unit must be plugged
into working outlet to
charge devices
Mobile Phone
Game
Devices
iPod
Laptop
PC/
Tablet
MP3/MP4