User's Manual

Previewing the Alarm and Turning the Alarm On/Off

At the set time, the alarm will sound for 1 hour.

1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and

release the Power Button or the relevant Alarm Button. The alarm sound will stop and “OFF” will

apear on the display briefly but the alarm icon will remain on the display, indicating the alarm is armed.

2. Press and release the desired Alarm Button during normal operation (alarm is not sounding) as needed

to preview the current alarm time and wake-to source, arm the alarm (alarm icon is present) or to cancel

it (no alarm icon).

Snooze Mode

1. Press and release the Snooze/Dimmer Button while alarm is sounding to temporarily silence the alarm

for the set snooze duration (default is 9 minutes).

2. To adjust the snooze duration: press and hold the Snooze/Dimmer Button during normal operation

(when alarm is not sounding). The current snooze duration will flash on the display. Press the – or +

Button to adjust the snooze time from 01 - 29 minutes. Press and release the Snooze/Dimmer Button

again (or no button within 10 seconds). Two beeps will sound to confirm snooze setting and return unit

to normal operation.

Dimmer Mode

When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle

through display brightness settings, including OFF. Settings affect both the display and cabinet LED.

Dimmer function will not work during FADE color change mode. When LED color mode is set to

NONE, pressing the Snooze/Dimmer Button will place unit in 1 COLOR mode with white backlight.

Press the Color Button again to return color mode to OFF.

Using the

iBT280