User's Manual

5. When pairing is successful, the Bluetooth icon will appear solid, cabinet lights will flash
blue two times (if light is on) and 2 beeps will sound, indicating the iBT297 is ready to play
music. There should also be an indication on your device. If no device is successfully paired
within 3 minutes the iBT297 will default to previous mode. Once the iBT297 is paired to a
device, when powered on and in Bluetooth mode, it will attempt to autolink when the
device is within range (about 33 feet). To reset Bluetooth, press and hold the Bluetooth
Pairing Button for 10 seconds.
P12
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT297. Once
your device is paired, the iBT297 can recognize it and you can play your audio through it.
1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode
(check in Options or Settings).
2. Press and release the Mode Button as needed until the “BT” indicator
icon appears on the display.
3. Press and hold the Bluetooth Pairing Button located on the back of the
unit for 2 seconds. The iBT297 will beep and the Bluetooth icon will
flash on the display, indicating the iBT297 is in pairing mode. If light mode
is on, the cabinet will flash blue and red.
4. “iHome iBT297” should appear in your device’s Bluetooth menu. Select
“iHome iBT297” to connect it. If prompted for a passcode, enter “1234”
on your device.
Using the
iBT297
12
Pairing Your Bluetooth Device
2s
MODE
iHome iBT297