iBT30 IB Size: 153mm x 120mm Printing color: Black Dec 14, 2012.
P2 Introduction iBT30 Thank you for purchasing the iHome iBT30. This product is designed to wirelessly stream music from all Bluetooth smartphones and tablets. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 Table of Contents iBT30 Included/ Meet Your iBT30............................................................................................. 1-2 Setting Up the Unit:Charging/ Turning the Unit ON and OFF...................................................3 Using Bluetooth:Pairing Your Device .....................................................................................4 Playing Audio Via Bluetooth................................................................................................
P4 iBT30 Included • iBT30 Speaker • Charging base • Stereo 3.
P5 iBT30 Meet Your iBT30 Volume Down Button Top Power Button Volume Up Button Front Status Indicator (located behind speaker grille) Back Pairing Button Master power switch Back Bluetooth Indicator USB Charging Port Aux-in Jack 2
P6 Setting Up the Unit: Charging 1. Connect the included AC adaptor to the DC jack located on the back of the charging base and connect the other end to a working wall outlet. Place unit on charging base. For first time use, leave unit on charging base until fully charged (about 8 hours). You can operate the unit while it is charging. The status indicator on the front of the unit will flash red when the unit needs charging and glow steadily red while it is charging.
P7 Using the Using Bluetooth: Pairing Your Device iBT30 NOTE: See the iBT30 Bluetooth Connection Guide for complete pairing details. 1. Slide the Power Off/On Switch located on the back of the unit to the on position (right) to turn the unit ON. 2. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 3. Press and hold the Pairing Button (located on the back of the unit) for 2 seconds.
P8 Using the Pairing with a Different Device iBT30 When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must turn off the Bluetooth capability of the already paired device. Playing Audio Via Bluetooth 1. Slide the Power Off/On Switch to the on position (right) to turn the unit ON.
P9 Using the iBT30 Stereo Bluetooth Pairing for Linking 2 iBT30 Units If you have 2 iBT30 units, you can activate stereo pairing between them. 1. Slide the Power Off/On Switch to the on position (right) on each unit to turn the unit ON. 2. Press and hold the Pairing Button (located on the back of the unit) AND the Volume + Button together for 2 seconds to define one iBT30 as the MASTER unit. 3.
P10 Using the iBT30 Playing Audio via Aux In 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. Slide the Power Off/On Switch to the on position (right) to turn the unit ON. 3. Power on the audio device and use the controls on the device to play or pause audio, and navigate tracks. 4. Adjust the volume on the unit by pressing the Volume – Button or Volume + Button.
P11 Using the iBT30 Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it.
move to back of book P2 iBT30 FCC Information FCC ID: EMOIBT30 IC: 986B-IBT30 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Information FCC Déclaration de la FCC relative à l'exposition aux radiations iBT30 FCC ID: EMOIBT30 IC: 986B-IBT30 Cet équipement est conforme aux limites d'exposition aux radiations de la FCC RF fixées pour un environnement non contrôlé. Ce transmetteur ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou un autre transmetteur.
move to back of book Internal Rechargeable Lithium-ion Battery P3 iBT30 This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
move forward P14 Troubleshooting Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT30. • Make sure the Power is ON, indicated by a solid blue light on the front of the unit. Unit doesn’t respond (frozen or locked up) • If the unit becomes unresponsive, the software may have frozen or become locked up. Remove the unit from the charging base.
move to back of book P15 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
move to back of book P16 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P17 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
