User's Manual

Unit doesn’t respond (no power)

• Check that all connections are correct and properly plugged in.

• Make sure your device is properly paired with the iBT30.

• Make sure the Power is ON, indicated by a solid blue light on the front of the unit.

Unit doesn’t respond (frozen or locked up)

• If the unit becomes unresponsive, the software may have frozen or become locked up. Remove the unit

from the charging base. Insert the end of a paper clip or similar into the reset pin hole on the bottom

of the unit.

Trouble pairing device/computer with iBT30

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see

our website for updates on pairing.

• Make sure you have the latest firmware for your device.

• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing

and linking.

• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth

device if the device is still within range (approx. 30 feet). To pair with a different device you must turn

off Bluetooth capability on the already paired device, or take it out of range.

Troubleshooting

P14

For further information and to see the latest instructions, visit www.ihomeaudio.com/support

move forward