User's Manual

iBT30
Using the
4
P7
Using Bluetooth: Pairing Your Device
NOTE: See the iBT30 Bluetooth Connection Guide for complete pairing details.
1. Slide the Power Off/On Switch located on the back of the unit to the on position (right) to turn the unit
ON.
2. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
3. Press and hold the Pairing Button (located on the back of the unit) for 2 seconds. The unit will turn on
and attempt to auto link to a previously paired device for 10 seconds, indicated by the front and back
indicator lights flashing blue. If a linked device is found, the indicator lights will glow solid blue.
4. If no linked device is found, the unit will enter pairing mode, and the lights will flash blue while the
unit attempts to pair. “iHome iBT30” should appear on your device’s menu. If “Not Connected” or
similar message appears, tap on this to begin/complete pairing. If your device asks for a password,
enter 1234 on the keyboard of your device. If no device is paired within 3 minutes, the front and
back indicator lights will flash red three times and the unit will revert to its previous state. To retry
pairing, follow steps 1 to 3.
5.
Once paired with a device, the blue indicator lights will glow steadily and a confirmation tone will
sound. There should be an indication on your device that pairing is complete. On some devices, you
must then select “Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired,
your device should link to the iBT30 whenever within range.