User's Manual

iBT30

Using the

Pairing with a Different Device

When you power ON the speaker, it will automatically link with the previously paired Bluetooth device

as long as that device is still within range (approx. 30 feet). So, to pair with a different device you must

turn off the Bluetooth capability of the already paired device.

Playing Audio Via Bluetooth

1. Slide the Power Off/On Switch to the on position (right) to turn the unit ON. The front and back blue

lights will flash as the unit searches for a previously paired device, and then turn solid blue once a

previously paired device is detected. You can then listen to audio streamed wirelessly from your

paired iPad, iPhone, iPod or other Bluetooth device.

2. Use the controls on your Bluetooth device to play or pause audio and navigate tracks.

3. Adjust the volume on the unit by pressing the Volume – Button or Volume + Button. You can also

adjust volume on your device.

4. When done listening, slide the Power Off/On Switch to the off position (left) to turn the unit OFF.

Note: Audio playing through the unit via the Aux line-in jack will be interrupted whenever Bluetooth

audio is detected.