User's Manual

Stereo Bluetooth Pairing for Linking 2 iBT30 Units

If you have 2 iBT30 units, you can activate stereo pairing between them.

1. Slide the Power Off/On Switch to the on position (right) on each unit to turn the unit ON.

2. Press and hold the Pairing Button (located on the back of the unit) AND the Volume + Button together

for 2 seconds to define one iBT30 as the MASTER unit.

3. Press and hold the Pairing Button (located on the back of the unit) AND the Volume – Button together

for 2 seconds to define the other iBT30 as the SLAVE unit. The pairing confirmation tone will sound.

While paired in this manner, the Master unit plays the left channel and the Slave unit plays the right

channel. Volume is controlled on the Master unit.

4. To deactivate the stereo Bluetooth link between the 2 units, slide the Power Off/On Switch on each

unit to the OFFposition (left).

iBT30

Using the