User's Manual

P11

Using FM Radio in Other Countries

Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to

USA frequency steps. To use the radio outside the USA:

1. Make sure unit is OFF.

2. Press and hold the Mode Button until “USA” appears in the display.

3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA.

4. Press the Mode Button again to exit frequency setting mode. 2 beeps will confirm setting.

ZZZ (Snooze)/Display Dimmer Button

1. To program Snooze, press and hold the ZZZ (Snooze)/Display Dimmer Button during normal

operation (when no alarm is sounding).

2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes).

3. Press and release the ZZZ (Snooze)/Display Dimmer Button to confirm Snooze setting

4. While the alarm is sounding, press and release the ZZZ (Snooze)/Display Dimmer Button to

temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be used several

times during alarm.

5. To adjust the brightness of the display, press and release the ZZZ (Snooze)/Display Dimmer Button

during normal operation (when no alarm is sounding) to cycle through the brightness display settings.

NOTE: Snooze function is disabled when operating on battery backup.

Sleep Mode

This unit allows you to sleep to the current sound source for a set time before turning the unit off.

1. To set Sleep time, press and release the Sleep Button as needed to cycle to the desired sleep

duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off).

2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep volume setting is

stored separately from other volume settings.

mode

Using the iBT31