User's Manual

9
P10
Using the iBT32
Playing Audio via Aux In
1. Connect one end of the included 3.5mm stereo
audio cable to the Aux-in jack on the bottom of the
unit under the splash seal and connect the other end
to the headphone or line-out jack on your audio
device.
2. Press and hold the Power Button on the unit to
turn it on.
3. Power on the audio device and use the controls on
the device to play or pause audio, and navigate
tracks.
4. Turn the Volume Knob
to adjust the system volume .
You can also adjust volume on your device.
5. When done listening, press and hold the Power
Button to turn the unit OFF. Remember to turn off your
device, too.
NOTE: Make sure no Bluetooth device is playing or
you will not hear the aux signal.
Mobile Phone
Game Devices
iPod
Laptop
PC/Tablet
MP3/MP4