iBT33 IB (English ) Size: 153mm x 120mm Printing color: Black Mar 03, 2015 P1 Model: iBT33 Go+ Arc Portable Rechargeable Bluetooth Stereo Speaker CHARGE BEFORE USE instruction manual Questions? Contact Customer Service at 1-800-288-2792
P2 Go+ Arc Introduction Thank you for purchasing the iHome Go+ Arc. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. This instruction booklet explains the basic operation and care of the unit. Please read carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 Go+ Arc Table of Contents Included ............................................................................................................................ 3 Meet Your Go+ Arc ............................................................................................................. 4 Charging the Unit................................................................................................................ 5 Pairing Your Device...............................................................
P4 Go+ Arc Included • Go+ Arc unit • Micro USB to USB cable • audio cable Go+ Arc micro USB to USB cable 3 audio cable
P5 Go+ Arc Meet Your Go+ Arc Top Panel Play/Pause/Pairing Button REV/FWD End/Answer Call Buttons Volume – /Volume + Buttons Power Button Front Back (behind grille) Battery Level Meter Bluetooth Status Indicator Light Reset port Microphone Aux-in Jack 4 Micro USB Charging/ Audio-in Port
P6 Using the Go+ Charging the Unit Arc CHARGE UNIT BEFORE USE 1. Connect the micro USB plug to the micro USB charging port on the back of the unit.
iHome Go+ Arc P7 Using the Go+ Pairing Your Device Arc Pairing is the set-up process to introduce your Bluetooth-capable device to the Go+ Arc. Once your device is paired, the Go+ Arc can recognize it and you can play your audio through it. 1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). 2. Press the Power Button to turn on the Go+ Arc.
P8 Using the Go+ Pairing with a Different Device Arc When you power ON the unit, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (approx. 30 feet). To pair with a different device follow steps 1 - 4 under ”Pairing Your Device” on previous page. Playing Audio Via Bluetooth 1. Press the Power Button to turn on the unit. The status indicator will glow solid blue when a linked device is in range and detected.
P9 Using the Go+ Speakerphone Operation Arc NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1. When a call is received, playing music is muted to hear the ring tone. Press thexxxxxxFWD/Answer Call Button to answer the call, or press the REV/End Call Button to ignore it. For call waiting function, use phone controls on your device. 2. When a call is completed, press the previous function.
P10 Using the Go+ Playing Audio via Aux In Arc 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. Press the Button on the unit to turn it on. 3. Power on the audio device and use the controls on the device to play or pause audio, and navigate tracks. 4. Press the – or + Button to adjust the system volume. You can also adjust volume on your device. 5.
P11 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P12 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P14 Go+ Arc FCC Information Mar 03, 2015 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. FCC ID:EMOIBT33 IC:986B-IBT33 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
P15 Troubleshooting Unit doesn’t respond (no power) • • • • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the Go+ Arc. Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) If the unit does not respond, try resetting the unit. Insert a paperclip or similar into the Reset port located on back of the unit for about 10 seconds.
P16 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
