iBT36 Waterproof Rechargeable Bluetooth Stereo Speaker System with speakerphone CHARGE BEFORE USE instruction manual BC
Using the iBT36 IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION For proper waterproof operation, make sure the waterproof cover on the left side of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place. water tight • • • • • • • not water tight The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter (3 feet).
Maintenance iBT36 • Place the unit on a level surface away from sources of direct sunlight or excessive heat. • Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture. • Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials can damage the surface of the unit.
Table of Contents iBT36 Included / Meet Your iBT36............................................................................................. 1-2 Charging the iBT36/Quick Battery Status Check/ECO Battery Mode .......................................3 Turning the Unit ON and OFF.............................................................................................4 Using Bluetooth: Pairing Your Device ....................................................................................
iBT36 Included 1 1. iBT36 Speaker 2. USB charging cable 3. Bottle opener/carabiner clip To remove carabiner clip: 1. Hold clip sideways to unit. 2. Press clip hinge post inwards and slide strap loop off of hinge post.
iBT36 Meet Your iBT36 Top view Volume Down Button Volume Up Button Power On/Off Button Play/Pause/Pairing Button Reverse/End Call Button Forward/Answer Call Button Front view Charging LED Indicator Side view Waterproof Door Cover Reset ECO Battery Mode On/Off Switch Aux-in Jack AUX-IN USB DC AUX-IN USB DC 5V, 1A IN PO WER RESET RESET ON ECOOFF 5V, 1A PO WER IN ON ECO OFF USB POWER IN Port (charges unit ) USB Out Port (to charge devices) 2 Power/Bluetooth Status Indicator Speakerp
Charging the iBT36 Using the iBT36 iHome iBT36 USB Power In port Computer connected to working outlet RESET AUX-IN USB DC IN PO WER 5V, 1A ON ECO OFF RESET AUX-IN USB DC 5V, 1A IN PO WER For first time use, make sure to fully charge the internal battery for about 8 hours.
Using the iBT36 Turning the Unit ON and OFF 1. Press the Power Button located on top of the unit to turn the unit ON. The green/red battery status and blue Bluetooth status LED indicators on the front of the unit will light and ascending tones will sound. 2. Press the Power Button to turn the unit OFF. Descending tones will sound. Note: if no audio is detected for 5 minutes, the unit will power off automatically to save battery life.
Using the Using Bluetooth: Pairing Your Device iBT36 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press the Power Button located on top of the unit to turn the unit ON. The first time the unit is turned on it will enter auto pairing mode: ascending tones will sound and the indicator light on the front of the unit will flash blue while the unit attempts to pair.“iHome iBT36” should appear on your device’s menu.
Using the Pairing with a Different Device iBT36 When you power ON the speaker, it will automatically link with the previously paired Bluetooth device as long as that device is still within range (about 33 feet). To pair with a different device, please follow step 3 on page 5. Playing Audio Via Bluetooth 1. Press the Power Button to turn on the unit. The light on front of the unit will flash blue and ascending tones will sound and the unit will search for a previously paired device.
Using the Using the Speakerphone feature iBT36 NOTE: The unit must be powered on to receive a call and a Bluetooth phone must be linked. 1. When a call is received, playing music is muted to hear the ring tone. Press the Talk Button to answer the call, or press the End Button to ignore it. For call waiting function, press the Talk Button to place a currently active call on hold and answer a new call; press the Talk Button to switch between the calls. 2.
Using the Charging Devices via USB Out Port iBT36 NOTE: The iBT36 will only charge devices when operating on the internal battery (when NOT connected to power source via the USB POWER IN port).The unit must be powered ON to charge devices via the USB Out Port. To charge devices via USB while operating on the internal battery, we recommend that the unit be fully charged first. The iBT36 will not charge external devices via USB when internal rechargeable battery is too low (red indicator is blinking).
iBT36 FCC/IC Information FCC ID:EMOIBT36 IC:986B-IBT36 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Industry Canada’s licence-exempt RSSs.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use oily solvents or chemicals. Rinse the unit off with tap water after use in salt water or swimming pool. 7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product. Keep gasket free of dirt, sand, or objects that could interfere with a proper watertight seal. 8.
Troubleshooting Unit doesn’t respond (no power) • • • • Check that all connections are correct and properly plugged in. For internal battery operation, make sure the unit is fully charged. Make sure your device is properly paired with the iBT36. Make sure the Power is ON. Unit doesn’t respond • If the unit appears to be “frozen” or locked up or hasn’t been used in a long time, you may need to reset it.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
