iBT39 Waterproof Rechargeable Bluetooth Stereo Speaker instruction manual CHARGE BEFORE USE Questions? Contact Customer Service at 1-800-288-2792
iBT39 IMPORTANT INFORMATION ABOUT WATERPROOF OPERATION For proper waterproof operation, make sure the waterproof cover on the side of the unit is completely flush with the unit by pressing along the entire edge of the cover until it is completely and securely in place. not water tight water tight • • • • • • • The unit is IP67 waterproof rated, meaning it is immersible for up to 30 minutes at a depth of 1 meter (3 feet). It will typically withstand rain, snow and being submersed in shallow water.
iBT39 Introduction Thank you for purchasing the iHome iBT39. This product is designed to provide high quality wireless sound for your Bluetooth audio device and for waterproof, dustproof and shock proof operation. This instruction booklet explains the basic operation and care of the unit. Please read carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
iBT39 Table of Contents Important Information About Waterproof Operation.......................................................................... 1 Introduction/Maintenance ................................................................................................................................ 2 Table of Contents.................................................................................................................................................. 3 Included ..............................
iBT39 Included • iBT39 unit • USB charging cable iBT39 USB charging cable 4
iBT39 Meet Your iBT39 Top Panel REV/FWD End/Answer Call Buttons Play/Pause/ Pairing Button Volume – /Volume + Buttons Power Button Right Side Front (behind grille) Bluetooth Status Indicator Light Battery Level Meter Aux-in Jack USB Charging Port Reset port Microphone 5 Waterproof cover
Using the iBT39 Charging the Unit CHARGE UNIT BEFORE USE 1. Connect the micro USB plug to the micro USB charging port on the side of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, charge unit for about 8 hours. 3. The Battery Level Meter on the front of the unit flashes while the unit is charging and turns solid once the unit is fully charged. See table above for charge status information.
Using the iBT39 Pairing Your Device Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT39. Once your device is paired, the iBT39 can recognize it and you can play your audio through it. iHome iBT39 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (look in Options or Settings). 2. Press and release the Power Button to turn on the iBT39.
Using the iBT39 Playing Audio Via Bluetooth Once the iBT39 is paired to a device, it will attempt to autolink when the unit is turned on and when the device is within range (about 33 feet). If there is no audio signal for 15 minutes (Bluetooth or Aux), the unit will power off to save battery life. 1. Press the Power Button to turn on the unit. The status indicator will glow solid blue when a linked device is in range and detected.
Using the iBT39 Speakerphone Operation NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. 1. When a call is received, playing music is muted to hear the ring tone. Press the FWD/Answer Call Button to answer the call, or press the REV/End Call Button to ignore it. For call waiting function, use phone controls on your device. REV/End Call Button to end the call and 2. When a call is completed, press the resume previous function. Playing Audio via Aux In 1.
Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit. If this fails, contact Customer Service at 1-800-288-2792. WARNING/DISPOSAL OF UNIT Do NOT attempt to change the battery. Doing so will void the warranty and could cause injury and damage to your device.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 11.
iBT39 FCC Information FCC ID:EMOIBT39 IC:986B-IBT39 This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Unit doesn’t respond (no power) • • • • Troubleshooting Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iBT39. Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) If the unit does not respond, try resetting the unit. Insert a paperclip or similar into the Reset port located on side of the unit for about 10 seconds. Note that doing so will clear settings.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
