User's Manual

iBT97

Using the

P12

Setting and Using the Alarms (cont’d)

8. Press the – or + Buttons to adjust the alarm volume on the unit. Note that the alarm volume setting

is stored separately from other volume settings.

9. Press the Alarm 1 Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm

alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.

Previewing the Alarm and Turning the Alarm On/Off

1. Press and release the Alarm Button to view the current alarm time and wake-to source.

2. While preview is active (within 5 seconds), press and release the Alarm Button as needed to toggle

the alarm ON and OFF, indicated by the alarm icon and a beep.

Alarm Skip

If Alarm 1 or Alarm 2 is active, press and release the Wakeup/Alarm Skip Button to skip the next

pending alarm time. The display will show “ALM 1 SKIP” or “ALM 2 SKIP” until the specified alarm time is

passed, then alarm skip is deactivated and the unit returns to normal alarm function.

Setting the Gentle Wake Timer

This unit has an adjustable gentle wake feature which gradually increases the volume of the alarm

or nap source from 0 up to the set wake volume over time (the default duration is 1 minute). You

can adjust the duration of the gradual volume increase from 1 - 10 minutes.

1. To set Gentle Wake duration, press and hold the Wakeup Button for 2 seconds until the Gentle Wake

duration time flashes on the display

2. Press the – or + Buttons to adjust the gentle wake time from 01 to 10 minutes.

3. Press and release the Wakeup Button to confirm settings. 2 beeps will confirm gentle wake duration

setting. NOTE: The gentle wake duration does not effect the overall alarm cycle, which lasts for 1 hour.