iCVBT100 Vanity Mirror - Quick Start Guide (English) Size: 153 x 140 mm (folded) Color: 3C + 2C (PMS Cool Gray 9C & PMS 2705U, Cyan) Material: 120 gsm wood free paper Date: June 9, 2020 iHome Beauty REF L E C T ST UDI O P RO iCV BT1 0 0 Quick Start Guide
What’s In the Box iCVBT100 Vanity Mirror AC Adapter Removable Detail Mirror Cleaning Cloth
Setup Overview Connecting Mirror to Power • Connect included AC adapter to DC jack on back of mirror and the other end to a working wall outlet. USB 2.
Front Panel Power Button Tap to turn mirror ON or OFF Minus/Plus Volume Buttons Tap to lower or raise volume Multi-Function Button Tap to play/ pause audio Tap to Answer/End calls Touch and hold to decline calls Touch and hold to access Siri or Google Assistant Light Button Tap to adjust brightness of mirror light Touch and hold to change light mode Note: Power and Light features operate separately and independently: • Turn the Power Button ON to access audio features including using Bluetooth.
Back Panel USB USB 2.
Light Function • Tap the Light Button to turn the mirror light ON. • Tap the Light Button repeatedly to cycle through brightness levels: Max, High, Mid, Low, and OFF. • Touch and hold the Light Button to cycle through light modes: Soft Yellow, Warm White, and Bright White.
Using Bluetooth Audio • Tap Power Button to turn speaker ON • Press and hold the Bluetooth Button on the back of the mirror for 3 seconds to enter pairing mode, indicated by the blinking icon on the front of the mirror • Select “iHome Reflect Studio Pro” on your device’s Bluetooth menu to connect. The icon will glow solid once connected.
Detail Mirror • Remove the protective tape from the included detail mirror and attach wherever you like on the Reflect Studio Pro mirror face (or anywhere!) • The back of the detail mirror has Simple-Stick™ micro suction material. If necessary, clean the Simple-Stick material with office tape. Maintenance • This mirror comes with a cleaning cloth to keep the large surface and detail mirror smudge free. • Wash the mirrors with mild soap and water when needed.
Charging Devices Mirror MUST be connected to power to use USB charging from the unit. • Connect USB charging cable (not included) to USB port and the other end to your device to charge. USB 2.
IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
