iD11 IB (English) Size: 153mm x 120mm Printing color: Black Apr. 24, 12. P1 Model: iD11 Portable Bluetooth Stereo System with Speakerphone for iPad, iPhone or iPod Questions? Visit www.ihomeaudio.
P2 Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 FCC Information FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Meet Your Unit Top of Unit (open) Support back rest for iPad, iPhone or iPod Retractable Dock mode Play/Pause/Pairing/Bluetooth Button/Indicator Light Power Button/Power Indicator Light /Mode Button – Volume Down Button Rear of Unit + Volume Up Button Bottom of Unit Dock Release Button Battery compartment door AC Adaptor jack Aux-in Jack DC 9V 3A Remote auto/on switch 1
P1 Meet Your Unit Included • IC system • 1 100V-240V AC Adaptor iD11 system AC adaptor 2
P6 RESET TEST E T ST 1. Connect the included AC adaptor to the AC Adaptor Jack on the back of the unit. 2. Connect the plug to a working outlet. R ESET Setting up the Unit to Operate on Power DC 9V 3A Setting up the Unit to Operate on Batteries The unit operates on 4 AA batteries for portable use. When the sound becomes weak or distorted, it’s time to replace the batteries with fresh ones. 1. Turn the unit over and slide open the battery compartment door located on the bottom of the unit. 2.
P7 Playing your iPad, iPhone or iPod 1. Make sure the unit has a power source (4 AA batteries are installed or AC adaptor is connected). Power output (volume) will be lower when operating on batteries. 2. Press the Dock Release Button on the back of the unit to expose the flexible 30 pin connector (if dock is retracted). 3. Gently dock a playing iPad, iPhone or iPod. The unit will power on indicated by the power light turning blue and in a moment, you will hear the audio from your device. 4.
Using Bluetooth: Pairing Your Device NOTE: See the iD11 Bluetooth Connection Guide for complete pairing details. 1. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 2. Press and hold the Play/Pause/Pairing Button for about 2 seconds to turn the unit on in Bluetooth mode. The light will alternately flash blue and green while the unit attempts to pair. 3.
Playing Audio Via Bluetooth Use Bluetooth mode to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 1. Press and hold the Button to turn on the unit in Bluetooth mode. The Button light will flash as the unit searches for a previously paired device, then turn solid when a previously paired device is detected. (If unit is already ON, press the Mode Button to toggle the unit between iPod/Aux-in audio mode and Bluetooth mode (the Button is lit in Bluetooth mode).
P8 Watching Videos in Landscape Mode 1. Remove any docked device from the unit. 2. Press gently on the Retracting Dock to store it inside the body of the unit. 3. Place your device sideways in the dock area resting against the back rest. 4. For Aux-in audio: Connect audio cable to the device’s headphone jack to the aux in jack on the back of the unit, and press and release the Mode Button to access Aux-in mode (make sure the Button is not lit,indicating iPod/Aux-in mode.
P9 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P10 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
