iDM11 IB (English) Size: 153mm x 120mm Printing color: Black Date: Nov 14, 2011 P1 Model: iDM11 Portable Rechargeable Bluetooth Speaker with Speakerphone Questions? Visit www.ihomeaudio.
P2 Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide,this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 FCC Information FCC Radiation Exposure Statement FCC ID:EMOIDM11 IC:986B-IDM11 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P5 Meet Your Unit Top/Front of Speaker Bluetooth/Speakerphone/Play /Pause Button Volume Up Button Volume Down Button Power Button Built-in Microphone Power/Charging/Pairing Indicator Light (in light up base) Rear of Speaker Built-in microphone Travel Lock/Aux/ Bluetooth Switch Micro USB Charging/ Audio in Port Power/Charging/Pairing Indicator Light (in base) 1
P6 Meet Your Unit Included • iDM11 system (1 speaker) • 24 inch micro USB to USB/3.5 mm charging and aux. audio cable Travel Lock: a. Move the Travel Lock switch on the back of the speaker to the position to temporarily disable the unit and prevent accidental button activation during travel that might drain the battery. Move switch to Bluetooth or Aux position for normal operation.
P7 Charging the Unit Built-in mic 1. Connect the micro USB plug to the micro USB charging port on the back of the speaker. 2. Connect the standard USB plug end of the cable to a powered USB port on a computer or other USB charging device. For first time use, charge unit for about 8 hours. 3. A red light pulses slowly through the base while the unit is charging and glows steadily blue once unit is fully charged.
P8 Using Bluetooth: Pairing Your Device NOTE: See the iDM11 Bluetooth Connection Guide for complete pairing details. 1. Move the Travel Lock/Aux/Bluetooth Switch on the back of the speaker to the Bluetooth position (right). 2. Press and hold the Button to turn on the unit (release when a light appears on the base). 3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 4.
P9 Playing Audio Via Bluetooth 1. Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 2. Press and release the Button to turn on the unit. The blue light will flash as the unit searches for a previously paired device, and then turn solid blue when a previously paired device is detected. 3. Press and release the Button to play or pause audio from your Bluetooth device.
P10 Playing Audio via Aux 1. Move the Travel Lock/Aux/Bluetooth Switch to the Aux position to listen to audio via aux line-in. 2. Connect the micro USB plug to the micro USB charging port on the back of the speaker and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device. 4. Press and hold the Button to turn on the unit (release when blue light appears). 5. Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device, too. 6.
P11 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P12 Limited 90 Day Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.