iDM8 IB Size: 153mm x 120mm Printing color: Black Jan 15, 13.
P2 iDM8N Introduction Thank you for purchasing the iHome iDM8. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 iDM8N FCC Information FCC Radiation Exposure Statement FCC ID: EMOIDM8N IC: 986B-IDM8N This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Table of Contents iDM8N Meet Your iDM8 ........................................................................................................... 1-2 Charging the Unit.............................................................................................................3 Using Bluetooth:Pairing Your Device .....................................................................................4 Playing Audio Via Bluetooth.............................................................................
P5 iDM8N Meet Your iDM8 Left Side Right Side Power/Charging/Pairing Indicator Light Power Button Volume Up Button Play/Pause/Pairing Button Bottom Lock/Aux/Bluetooth Switch Volume Down Button Back Micro USB Charging Port 1
P6 Included iDM8N • iDM8 system • Micro USB to USB/3.5 mm audio cable Travel Lock (bottom of unit) The unit includes a travel lock position (left) to save battery life and prevent inadvertent button activation when in transit. When in the travel lock position, all functions are disabled.
P7 Charging the Unit Using the iDM8N 1. Connect the micro USB plug to the micro USB charging port on the back of the unit. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. For first time use, charge unit for about 8 hours. 3. A green light flashes while the unit is charging and glows steadily when unit is fully charged. If unit is not powered on when micro USB plug is connected, the green light flashes once to indicate unit is charging. .
P8 Using the Using Bluetooth: Pairing Your Device iDM8N NOTE: See the iDM8 Bluetooth Connection Guide for complete pairing details. 1. Move the Lock/Aux/Bluetooth Switch to the Bluetooth position (right). 2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 3.
P9 Using the iDM8N Playing Audio Via Bluetooth 1. Move the Lock/Aux/Bluetooth Switch to the Bluetooth position (right) to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 2. Press and hold the Power Button for 2 seconds to turn on the unit. The amber light will flash as the unit searches for a previously paired device, and then turn green when a previously paired device is detected. 3.
P10 Using the iDM8N Playing Audio via Aux 1. Move the Lock/Aux/Bluetooth Switch to the Aux position (center) to listen to audio via aux in. 2. Connect the micro USB plug to the micro USB charging port on the back of the unit and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device. 3. Power on the audio device and place in play mode. 4. Press and hold the Power Button to turn on the unit (release when green light appears). 5. Use the Volume +/- Buttons to adjust volume.
P11 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P12 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10.
P14 Unit doesn’t respond (no power) Troubleshooting Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iDM8. Make sure the Lock/Aux/Bluetooth switch is not in the Lock (left) position (Lock disables all functions). Resetting the Unit If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it.
P15 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
