iDM9 IB (English) Size: 130mm x 102 mm Printing color: Black Date: Mar 21, 2012 P1 Model: iDM9 Rechargeable Handsfree Speakerphone Questions? Visit www.ihomeaudio.
P2 Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide,this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance • Place the unit on a level surface away from sources of direct sunlight or excessive heat.
P3 FCC Information FCC ID:EMOIDM9 IC:986B-IDM9 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Add French language Date: Mar 21, 2012 P4 Information FCC FCC ID:EMOIDM9 IC:986B-IDM9 Déclaration FCC quant à l'exposition à la radiation Cet équipement est conforme aux limites FCC relatives à l'exposition à la radiation par radiofréquences établies pour les environnements non contrôlés. Cet émetteur ne doit pas être colocalisé ou utilisé en conjonction avec tout autre émetteur ou antenne. Cet appareil est conforme à la norme RSS-210 des règlements relatifs aux circuits intégrés.
P5 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information. WARNING/DISPOSAL OF UNIT Please do NOT attempt to change the battery yourself.
P6 Meet Your Unit Included • iDM9 system (1 speaker) • 24 inch micro USB charging cable • 12V Car charger Travel Lock: a. Move the Travel Lock/Aux/Bluetooth switch on the back of the speaker to the position to temporarily disable the unit and prevent accidental button activation during travel that might drain the battery. Move switch to Bluetooth or Aux position for normal operation.
P7 Meet Your Unit Top/Front of Speaker Power Button/Ignore Call/ Power/Charging Indicator Light Bluetooth/Answer call (Speakerphone)/ Play/Pause Button/Bluetooth Indicator Light Volume Down Button Volume Up Button Built-in microphone Rear of Speaker Micro USB Charging Port Travel Lock/Aux/ Bluetooth Switch Aux Line-in jack 2
P8 Charging the Unit Step 1 For first time use, charge unit for about 8 hours. 1. Connect the micro USB plug to the micro USB charging port on the back of the speaker. 2. Connect the standard USB plug end of the cable to a powered USB port on a computer or other USB charging device and the micro end of the cable into the iDM9. 3. To use with the included 12V car adaptor, connect the car adaptor to the car’s cigarette lighter, connect the standard USB plug to it and connect the micro end to the iDM9. 4.
P9 Using Bluetooth: Pairing Your Device NOTE: See the iDM9 Bluetooth Connection Guide for complete pairing details. 1. Move the Travel Lock/Aux/Bluetooth Switch on the back of the speaker to the Bluetooth position (right). 2. Press and hold the Button to turn on the unit (release when button lights up and unit beeps). 3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 4.
P10 Playing Audio Via Bluetooth 1. Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 2. Press and hold the Button to turn on the unit. The bluetooth button light will flash as the unit searches for a previously paired device, and then turn solid when a previously paired device is detected. 3. Press and release the Button to play or pause audio from your Bluetooth device.
P11 Playing Audio via Aux 1. Move the Travel Lock/Aux/Bluetooth Switch to the Aux (middle) position to listen to audio via aux line-in. 2. Connect a standard stereo audio cable with 3.5mm plug (not included) to the Line-in Jack on the back of the speaker and connect the other 3.5 mm audio plug to the headphone or line-out jack on your audio device. 3. Press and hold the Button to turn on the unit. 4. Place your audio device in play mode 5. Use the Volume +/- Buttons to adjust volume.
P112 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 (one) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
