iKN105 IB (English)-r Size: 130 x 102 mm Color: 1C + 1C (Black text on white paper) 20 pages Date: Feb 09, 2015 P1 Model: iKN105 charging stereo alarm clock with speakerphone and removable battery K2 dual CHARGE K-CELL BEFORE USE instruction manual Questions? Contact Customer Service at 1-800-288-2792
P2 K2 Introduction Thank you for purchasing the iHome K2. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, tablet or other Bluetooth audio device and mobile charging on the go with the included removable K-Cell rechargeable battery. This unit features NFC (Near Field Communication) technology which allows you to wirelessly connect your NFC–enabled device to instantly ‘pair and play’.
P3 K2 GENERAL BATTERY PRECAUTIONS • • • • • • Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal. Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other electrolytic substance. Always confirm that the temperature is 5°C - 35° C (41° - 95° Fahrenheit) before you charge the battery. Leakage or deterioration of the battery may occur if this warning is not heeded.
P4 K2 Table of Contents Included .........................................................................................................................................4 Meet Your K2 ..................................................................................................................................5 Display...........................................................................................................................................6 Setting Up the Unit.........................
P5 K2 Included • K2 Unit • K-Cell • AC adaptor • USB charging cable • FM antenna K2 Unit K-Cell AC adaptor USB charging cable 4 FM antenna
P6 Meet Your K2 K2 Top Bluetooth Pairing Button Talk/End Call Button Mode Button Power/Alarm Reset Button Alarm 1/Alarm 2 Buttons K-Cell Eject Button K-Cell Battery Level Meter Sleep Button Volume Down/ Volume Up Buttons K-Cell Plus/Minus Settings Buttons Left Side Play/Pause and Presets Button Right Side Snooze/Dimmer Button Back Bottom K-Cell manual eject Backup Battery Compartment DC Jack Aux-in Jack USB Charging Port NFC Antenna Area Time Set Button 5 FM Antenna jack
P7 K2 The Display Time Display PM/AM Indicators Low Backup Battery Indicator Sleep Mode Indicator Radio Mode Indicator Mode/Wake to Alarm Source Indicators: Bluetooth device, Radio frequency, Tone Alarm Active Indicator Bluetooth Indicator Setting Up the Unit TEST T EST 6 RESET R ESET • Connect the included AC adaptor to the DC jack located on the back of the unit and connect the other end to a working wall outlet to power the unit and charge K-Cell.
P8 Charging K-Cell via AC Adaptor Charge inserted K-Cell fully before use. For first time use, charge for at least 3 hours. Use iHome K-Cell battery ONLY. Do NOT attempt to use with/insert other USB battery cells. K2 To insert K-Cell: Make sure the iHome name and the arrow on the K-Cell faces the same direction as the iHome name and arrow on the front of the unit (with the channel on the K-cell facing the back) before inserting. Press down gently on K-Cell until it locks into place.
P9 Using the Charging the K-Cell via USB K2 Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect the included micro USB cable to the micro USB Charging Port on the top of the K-Cell and connect the other standard USB plug to a computer, USB AC adaptor (not included) or other USB power source. The LED on the K-Cell flashes while it is charging and becomes solid once fully charged.
P10 Using the Charging Devices Using the K-Cell Charge K-Cell fully before use. For first time charge, charge for at least 3 hours. Connect the USB cable plug included with your device to the standard Charging Port on the top of the K-Cell and connect the other end to the device you wish to charge. To charge an Android or Windows phone you may use the USB to micro USB cable supplied with this model.
P11 Using the Setting the Clock K2 1. Press and hold the Time Set Button located on the back of the unit for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. 3.
P12 Setting and Using the Alarm (Continued) Using the K2 4. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth, radio or tone. The selected wake-up source will flash in the lower part of the display. Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is detected, the alarm will default to Tone. Wake to Radio: Press the Alarm Button to confirm.
P13 Using the Using the FM Radio K2 1. Press and release the Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). Connect and extend the included FM antenna for best reception. 3. Press the or Buttons to adjust the volume on the unit. 4. When you are through listening, press the Button to turn the unit off.
P14 Using the Using FM Radio in Other Countries K2 Different areas of the world use different FM frequency steps and ranges. By default, this unit is set to USA frequency steps. To use the radio outside the USA: 1. Make sure unit is OFF. 2. Press and hold the Mode Button for 5 seconds until “USA” appears in the display and a beep sounds. 3. Press and release – or + Buttons to cycle to your location: Europe, Japan, Australia, China or USA. 4. Press the Mode Button again to exit frequency setting mode.
P15 Using the Using Bluetooth: Pairing Your Device Using NFC K2 This unit features wireless NFC pairing, which allows NFC-enabled devices to pair and play instantly. (For pairing non-NFC devices, please see the following section “Pairing Your Device Manually”.) The first time the unit is powered on, it will enter auto-pairing mode. Follow steps below to pair. 1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described in the device’s user manual. 2.
P16 Pairing Your Device Manually Using the K2 Pairing is the set-up process to introduce your Bluetooth-capable device to the K2. Once your device is paired, the K2 can recognize it and you can play your audio through it. 1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (check in Options or Settings). 2. Press the Power Button to turn on the K2.
P17 Using the Pairing with a Different Device K2 When you power ON the unit, it will automatically link with the most recently connected Bluetooth device as long as that device is still within range (approx. 30 feet). If no device is found within 3 minutes, the unit will power down. To pair with a different device follow steps 1 - 4 under ”Pairing Your Device” on previous page. Playing Audio Via Bluetooth 1. Press the Button to turn on the unit.
P18 Using the Speakerphone Operation K2 NOTE: The unit must be powered on and linked to a Bluetooth phone to receive a call. When a call is received, playing music is muted to hear the ring tone. The 1. Press the Button to answer a call, or press and hold the waiting function, press the call; press the Button will flash green. Button to ignore the call. For call Button to place a currently active call on hold and answer a new Button to switch between the calls.
P19 Using the Playing Audio via Aux In K2 1. Connect one end of the included 3.5mm stereo audio cable to the Aux-in jack on the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. Press the Button on the unit to turn it on. 3. Press and release the Mode Button as needed until “AUX-IN” appears on the display. 4. Power on the audio device and use the controls on the device to play or pause audio, and navigate tracks. 5.
P20 Replacing and Installing Clock Backup Battery Using the K2 Note: 1 CR2450 battery is included with the unit. Remove pull tab before using the unit. This model is equipped with a battery backup circuit that will maintain the time and other settings in the event of a temporary power interruption (the display is NOT maintained). When the backup battery is getting weak the Low Backup Battery Indicator will flash for 10 seconds in the display when the unit is powered ON or OFF then disappear.
P21 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P22 K2 FCC/IC Information FCC ID: EMOIKN105 IC ID: 986B-IKN105 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s).
P23 Troubleshooting Unit doesn’t respond (no power) • • • • Check that unit is connected to AC power. Make sure your device is properly paired with the K2. Make sure the Power is ON. If the unit seems “frozen” or locked up, disconnect the AC adaptor, remove the backup battery and let unit stand for 3 minutes to reset the unit. Doing so will erase all settings. Replace backup battery and re-connect AC adaptor.
P24 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
