User's Manual

P10

Charging Devices Using the K-Cell

Charge K-Cell fully before use. For first time charge, charge for at least 3 hours.

Connect the USB cable plug included with your device to the standard

Charging Port on the top of the K-Cell and connect the other end to the device

you wish to charge. To charge an Android or Windows phone you may use

the USB to micro USB cable supplied with this model. To charge an Apple

IOS iPhone or iPod, with either Lightning or 30-pin connector, use the

charging cable that was supplied with your Apple device.

Bypass Charging Mode: To charge a device when the inserted K-Cell is depleted but power remains in

the K1 internal battery, press and hold the

Button for about 5 seconds to bypass the K-Cell and charge

directly from the K1.

5 SECS

Using the