User's Manual

P11

Using Bluetooth:

Pairing Your Device Using NFC

This unit features wireless NFC pairing, which allows NFC

enabled devices to pair and play instantly.

(For pairing non

NFC devices, please see the following section “Pairing Your Device Manually”.)

The first time the unit is powered on, it will enter auto-pairing mode. Follow steps below to pair.

1. Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability as described

in the device’s user manual.

2. Place your NFC–enabled device in play mode.

3. Touch the area of your playing NFC device against the NFC antenna area on the top left of

the unit near the Power/End Button. The unit will turn on and enter automatic pairing mode, a tone

will sound and the Bluetooth button will flash quickly while the unit attempts to pair.

4. “iHome Kineta K1” should appear on your device’s menu. If your device asks if you wish to pair,

accept (select “Yes” or similar).

Once paired with a device, the Bluetooth button will glow solid,

confirmation tones will sound and your music will play through the unit.

Powering off the unit will disconnect Bluetooth device. To disconnect your device without powering the

unit off, simply touch it again on the antenna area on top of the unit.

Using the