User's Manual

Pairing is the set-up process to introduce your Bluetooth-capable device to the K1. Once your

device is paired, the K1 can recognize it and you can play your audio through it.

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make

it “discoverable” by turning on Bluetooth mode (check in Options or Settings).

2. Press the Power/End Button to turn on the K1. The first time the unit is powered on, it will

enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow

step 3 to begin pairing.

Press and hold the Bluetooth Button for 2 seconds. The pairing tone will sound twice and

the Bluetooth Button will flash quickly, indicating the unit is in pairing mode.

P12

5. If pairing is successful, a tone will sound and the Bluetooth Button light will glow solid, indicating the K1

is ready to play music. There should also be an indication on your device. If no device is successfully

paired within 3 minutes the K1 will default to previous mode. Once the K1 is paired to a device, it will

attempt to autolink when the device is within range (about 30 feet).

Pairing Your Device Manually

4. “iHome Kineta K1” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected”

or similar message appears, select “iHome Kineta K1” to connect it. If prompted for a passcode, enter

“1234” on your device’s keypad.

For iPhone

iHome Kineta K1 iHome Kineta K1

iHome Kineta K1

For other

Using the