iP76 IB (English) Size: 153mm x 120mm Printing color: Black Date: Mar 6, 2012 P1 Model: iP76 Glowtunes Wireless 4-Speaker Tower Stereo System Questions? Visit www.ihomeaudio.
P2 Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. It will also charge and play your docked iPhone or docking iPod and delight you with its varied color displays. Along with the included Quick Bluetooth Connection Guide,this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference.
P3 FCC Information FCC ID:EMOIP76 IC:986B-IP76 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
P4 Information FCC FCC ID:EMOIP67 IC:986B-IP76 Déclaration FCC quant à l'exposition à la radiation Cet équipement est conforme aux limites FCC relatives à l'exposition à la radiation par radiofréquences établies pour les environnements non contrôlés. Cet émetteur ne doit pas être colocalisé ou utilisé en conjonction avec tout autre émetteur ou antenne. Cet appareil est conforme à la norme RSS-210 des règlements relatifs aux circuits intégrés.
P5 Meet Your Glowtunes Speaker Tower Included • iP76 system (main unit) • 100-240V AC universal adaptor • Remote control mute light mode Rz16 Setup Your Unit Connect the included 100-240V AC adaptor to the AC Adaptor Jack located on the back of the unit and connect the other end into a working wall outlet. If the outlet is controlled by a switch, turn the switch on.
P6 Meet Your Unit Top of Speaker Light Mode Buttons Press to cycle colors/ settings for each mode Dock iPhone/iPod Slow Fade Button Pulse to Music Button Solid Color Button Lamp Button Power Button Strobe Button Audio Mode Button Switch to iPhone/iPod/ Line-in mode Bluetooth Button Raise Volume Button Lower Volume Button Play/Pause iPhone/iPod Rear of Speaker Line-in Aux Line-in Jack Top Y PB Component Video Out Bottom AC Adaptor Jack Light On/Off Button PR Video Out Jacks DC 12V 4A
P7 Using Bluetooth: Pairing Your Device NOTE: See the iP76 Bluetooth Connection Guide for complete pairing details. 1. Press the Button to turn on the unit (release when buttons light up). 2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device). 3. Press and hold the Button on the unit until the button flashes blue and the unit beeps twice to indicate pairing attempt. The Button will flash while the unit attempts to pair.
P8 Playing Audio Via Bluetooth 1. Press and release the Button to turn on the unit. The Button light will flash blue as the unit searches for a previously paired device, and then turn solid blue when a previously paired device is detected. 2. Press and release the Button to play or pause audio from your Bluetooth device. 3. Use the Volume Buttons to adjust volume. 4. When done listening, press the Button to turn the unit off. Playing and Charging Your Docked iPhone or iPod 1.
P9 Playing Audio via Aux 1. Connect a 3.5 mm audio plug from a standard stereo audio cable (not included) to the Line-in jack in the back of the unit and connect the other end to the headphone or line-out jack on your audio device. 2. Press the Button to turn on the unit (release when white light appears). 3. Press the Button to listen to audio via aux line-in. Make sure there is no playing iPhone or iPod docked in the unit or you will hear audio from both devices. 4.
P10 Using Color Modes 1. Press and release the Button as needed to turn the lamp on or off. You can also press any color mode button to turn on the lamp in that mode. Press a color mode button repeatedly to cycle through its settings. 2. Slow Fade - Press and release the Button as needed to cycle through color fade effects such as fade from the bottom, fade from the top, fade from center out, etc. 3.
P11 Troubleshooting Unit doesn’t respond (no power) • Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iP76. Resetting the unit If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so, press and hold the Button and the Button simultaneously for about 3 seconds. Doing so will restore the unit to default settings. NOTE: After a reset, you will need to re-pair your Bluetooth device(s).
P12 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
P13 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of One (1) Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
