User's Manual

Using Bluetooth: Pairing Your Device

NOTE: See the iP76 Bluetooth Connection Guide for complete pairing details.

1. Press the Button to turn on the unit (release when buttons light up).

2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s

instructions to add or setup a Bluetooth device).

3. Press and hold the Button on the unit until the button flashes blue and the unit beeps twice

to indicate pairing attempt. The Button will flash while the unit attempts to pair.

4. “iP76” should appear in your device’s list of Bluetooth devices; its status display may

indicate “not paired” or “not connected”. Select iP76 to connect. If your device asks for a

password, enter 1234 on the keyboard, keypad or display of your device. If no device is

paired within 3 minutes, the Button light will go out and the unit will power on. If this

occurs, retry steps 2-4.

5. Once paired with a device, the Button light will glow steadily blue and one beep will

confirm that pairing is complete. There should also be an indication on your device that

pairing is complete. On some devices, you must then select “use as a stereo audio device”

or similar on the device’s Bluetooth menu. Once paired, your device should autolink to the

iP76 whenever within range.