works with iHome Connect Wi-Fi Network Setup app iHome Sleep FREE alarm clock app iHome Radio Internet radio app available on the App Store works with iW2 User Manual AirPlay wireless speaker system English www.ihomeaudio.
Welcome to the iHome iW2 Thank you for choosing iHome. The Air Series represents the new frontier of product offerings from iHome that embrace Wi-Fi connectivity and AirPlay, Apple’s new wireless streaming technology. The iHome iW2 with AirPlay offers the latest experience in home audio entertainment allowing users to stream digital audio over Wi-Fi from iTunes, iPad, iPhone and iPod touch. Featuring SRS TruBass DSP technology, the iW2 offers fidelity audio with a versatile, space-saving design.
iW2 Overview Contents 1. iW2 speaker 2. Power adaptor 4. USB sync cable 5. Remote control 6. Document pack bass treble reset Rz10 Start Guide power adaptor remote USB sync cable iW2 Speaker Compatibility USB connector works with: iPod touch (1st, 2nd, 3rd, and 4th generation), iPod nano (2nd, 3rd, 4th, 5th, and 6th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPad, and iPad2. AirPlay works with: iTunes, iPod touch (2nd, 3rd, and 4th generation), iPhone 4, iPhone 3GS, iPad 2, and iPad.
iW2 Controls TOP PANEL power power iPod and iTunes music controls AirPlay Wireless mode (audio via iOS device or iTunes) iPod mode volume (audio via USB sync cable or aux-in) status LED Green when touching a button on remote Green, blinking when volume is muted aux-in status iPod dock network setup 12V 3A REAR PANEL firmware status LED aux-in aux-in status iPod dock AC power network setup Wi-Fi network setup 12V 3A USB iPad, iPhone, & iPod docking Wi-Fi network status LED ethernet (a
Quick Start Power 1 2 Connect to power source Press & hold power button (3 seconds) to power unit ON. 3 2 Press repeatedly to cycle between standby and ON. Press & hold (3 seconds) to activate power save mode and reset the iW2. outlet 12V aux-in status iPod dock Note: When the iW2 is in power save mode, you must press & hold to begin using your iW2 speaker.
Getting Started Master Power The iW2 has a master power mode control interface to power the unit ON or OFF, help conserve energy, and reboot the iW2 speaker. In order for the iW2 speaker to power ON, the unit must be connected to a AC outlet. Master Power ON - Press & hold Master Power OFF - Press & hold unit. Power Button (3 seconds) to boot-up and activate your iW2 speaker.
Using your iW2 Top panel controls The iW2 speaker has a backlit control interface for power, mode, volume, and music controls. Controls will be lit according to the status of the iW2 speaker and the selected mode. Note: Music transport controls will flash once to signal a proper press.
Network Setup for AirPlay Check list Please verify the following steps before attempting to connect your iW2 speaker to a Wi-Fi network: To enjoy AirPlay wireless audio, you must have the following: - iTunes 10.1 or later on a Mac or PC. - iPad, iPhone, or iPod touch with iOS 4.2 or later. - A functioning home network with Wi-Fi. Download the latest software updates for iTunes and your iOS device to ensure that you are able to enjoy the latest AirPlay enhancements and compatibility.
Wi-Fi Network Setup Option A - Connecting with your iPod touch, iPhone, or iPad (Recommended) If you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we recommend that you use our free iHome Connect app for the quickest Wi-Fi network setup experience. 1 To connect your iW2 speaker to a Wi-Fi network using an iOS device, follow these steps: 12V 1. Connect AC power and power ON iW2 speaker. aux-in iPod dock status network setup 12V 3A 1.
Wi-Fi Network Setup continued... Option B - Connecting with your Mac or PC over Wi-Fi To connect your iW2 speaker to a Wi-Fi network using a Mac or PC, follow these steps: 1 12V 1. Connect AC power jack and power ON iW2 speaker. 2. Press and hold (5 sec.) unit. aux-in iPod dock status network setup 12V 3A press & hold power button (3 seconds) to power ON iW2 Network Setup button on the back of Note: The Network Status LED will begin flashing green and the top control panel will also flash.
Music Connectivity Connecting to the iW2 speaker You can connect to your iHome iW2 speaker four different ways: 1. Using AirPlay® to stream wirelessly from iTunes on your Mac or PC (iTunes can stream to multiple AirPlay speakers). 2. Using AirPlay® to stream wirelessly from your iPad, iPhone, and iPod touch (iOS devices stream to only one AirPlay speaker at a time). 3. Using the USB iPod docking port on the rear panel with a iPod USB sync cable for audio and charging your iPad, iPhone, or iPod. 4.
Control SRS TruBass The iW2 features SRS TruBass digital sound processing to enhance the audio performance and ensure proper bass response when listening to your music. The SRS TruBass function is on by default and can only be turned off or on with the IR remote by pressing the The Front Status LED will flash Green when the SRS TruBass effect is turned OFF or ON via the remote. SFX button. EQ The iW2 has an EQ feature that is controlled via the remote that adjusts Bass and Treble.
Troubleshooting Quick tips for problems with network setup: 1. Verify that your router is discoverable (must broadcast itself and not require user to type in the exact name). Verify that the firmware of your router is up-to-date. 2. Must use WPA/WPA2 security (not WEP, or WPA/WPA2 enterprise). 3. Sometimes moving the iW2 closer to your access point (within 10-6 ft) during network setup. *this can happen sometimes when multiple Wi-Fi networks are creating interference. 4.
AirPlay & Network Setup Problems Solution I am unable to connect the iW2 to my home Wi-Fi network. 1. Verify that your Wi-Fi network is functioning and Wi-Fi certified. This device is only compatible with Wi-Fi certified routers. 2. Move the iW2 closer to your network access point; the Wi-Fi signal is weak or there are overlapping Wi-Fi signals or the iW2 is out of range of your Wi-Fi network. 3. Enable SSID broadcast (un-hide network) on the Wi-Fi router.
Problems Solution I’ve selected the iW2 speaker as my AirPlay audio source, but I do not hear any music. 1. Verify that the volume is not muted or set to 0. 2. Verify that there is not another iTunes library or iOS device connected to the iW2 3. speaker. Try restarting iTunes or your iOS device. 4 Try restarting your iW2 by lifting the iW2 off the charging base and switch the rear power switch OFF and then ON. Upgrade the software on your AirPlay compatible device (iTunes, iPad, iPhone, or iPod touch).
General Problems Solution The iW2 doesn’t respond or doesn’t turn ON. 1. Verify that the adaptor is connected and the power outlet is always ‘live’ (not controlled by a wall switch). 2. Reset the iW2 Hardware: - Unplug & reconnect the AC power jack from back of the iW2 speaker. - Press & hold power button (3 seconds) to turn the iW2 speaker on and wait 20 seconds for the unit to startup. No sound. 1. Verify that the volume is not muted or set to 0. 2. Verify the mode (AirPlay Wireless or iPod mode). 3.
FAQ’s What is AirPlay? AirPlay is a wireless audio and video platform designed by Apple to stream digital media over a home network (Wi-Fi or Ethernet). AirPlay is built-in to iTunes and the iPad, iPhone, and iPod touch running the latest software. For AirPlay enabled speakers, this means: 1. Consumers can stream their iTunes music to our iW2 AirPlay enabled speaker, their Apple TV, or other AirPlay enabled speakers. 2.
Consumer Product Safety Guide Safety Instructions FCC Radiation Exposure Statement 1. FCC ID: EMOiW2. IC: 986B-iW2 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. 2.
Warranty Limited 1 Year Warranty Information iHome, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
www.ihomeaudio.
