iWBT1 IB (English) Size: 90 x 120 mm Color: 1C + 1C (Black text on white paper) Date: Jun.
Contents What’s Included ................................................................. 2 Controls & Indicators....................................................... 3 Getting Started: Charging ............................................4 Using the Universal Bracket......................................... 5 Pairing a Device .............................................................6-7 Listening to Bluetooth Audio...................................... 7 Aux-out Audio via Bluetooth ..................
Introduction Thank you for purchasing the iHome iWBT1 Bluetooth rechargeable clip-on speaker. This product is designed for high quality wireless audio on the go. Please read these instructions fully and save for future reference.
Controls and indicators TOP Multi Function Button Volume Down/ Previous Track Button Volume Up/ Next Track Button LED Indicator RIGHT BOTTOM Speaker Microphone Audio out/ Charge Port 3
Getting Started CHARGING Charge unit before use. For first time use, charge for about 3 hours. 1. Move the cover from the Audio/Charging Port and connect the 3.5mm plug on the included charging cable. 2. Connect the USB end of the charging cable to a USB power source, such as a computer or USB adaptor. The LED indicator turns RED while the unit is charging then turns off when charging is complete. Unit can operate up to 8 hours once fully charged.
Getting Started USING THE UNIVERSAL BRACKET 1. Insert Universal Bracket into opening slot of unit as shown 2. Clip unit with bracket inserted to desired flat surface (car visor, etc.) making sure controls are accessible.
Using Bluetooth PAIRING A DEVICE Pairing is the set-up process to introduce your Bluetooth-capable device to the iWBT1. Once your device is paired, the iWBT1 can recognize it and you can play your audio through it. 1. Turn on your Bluetooth device and make it discoverable by turning on Bluetooth mode (check in Options or Settings on device). 2. Make sure unit is OFF. Press and hold the Multi-function Button for 8 seconds.
Using Bluetooth PAIRING A DEVICE (continued) • If no device is paired within 3 minutes the iWBT1 will default to previous mode. • Once the iWBT1 is paired to a device, it will attempt to connect to the most recently paired device when the device is within range (about 30 feet). • If no device is connected, press the Multi-function Button to attempt to connect to last connected device. • To pair with other devices, follow steps above. LISTENING TO BLUETOOTH AUDIO 1.
Using Bluetooth AUX OUT AUDIO VIA BLUETOOTH Stream audio to iWBT1 connected via audio cable to speaker The iWBT1 allows you to play music from your paired Bluetooth device through any speaker or audio device that has a standard 3.5mm aux line-in jack. 1. Connect a standard 3.5 mm audio cable (not included) from the Audio Out/Charge Port on the iWBT1 to the aux/line-in jack on the speaker. Turn on the speaker and adjust volume to mid level. 2.
USING THE SPEAKERPHONE The iWBT1 allows you to answer, end and ignore calls, mute calls, transfer calls between a paired phone and the unit, and to switch between calls. 1. Press and hold the Multi-function Button for 4 seconds to turn the iWBT1 ON. The LED indicator will flash blue and a tone will sound. • To answer a call, tap the Multi-function Button. Tap again to end the call.
CONSUMER SAFETY INFORMATION IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1.
7. Attachments – Do not use attachments not recommended by the product manufacturer. 8. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 9. Damage Requiring Service – The unit should be serviced by qualified service personnel when: A.
FCC/IC INFORMATION FCC Radiation Exposure Statement FCC ID: EMOIWBT1 IC: 986B-IWBT1 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada licence-exempt RSS standard(s).
Troubleshooting Unit doesn’t respond (no power) • Check that unit is fully charged. • Make sure your device is properly paired with the iWBT1. • Make sure the Power is ON. Resetting Bluetooth If Bluetooth function is not operating properly, you may wish to reset Bluetooth. To do so, press and hold the Power Button for 10 seconds. You will hear a long high tone. You will need to re-pair your paired devices.
LIMITED 1 YEAR WARRANTY iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
