User's Manual

SETTING THE TIME:

BLUETOOTH TIME SYNC &

MANUAL TIME SETTING

BLUETOOTH TIME SYNC

This unit is equipped with Bluetooth time sync. By default, the unit will sync

to the time on a paired Bluetooth device with installed and connected iHome

Zenergy™ App (when it is within Bluetooth range of 33 feet). This is useful for

automatic time adjustment from Standard Time to Daylight Saving Time and

back. To turn Time Sync OFF, press and hold the Time Set Button for 10 seconds.

“TS:ON” will appear in the display, indicating time sync is ON. Press the + or –

Buttons to toggle display to “TS:OFF”, then press the Time Set Button to exit.

See page 10 for information on pairing your Bluetooth device.

SETTING THE TIME MANUALLY

1. Press and hold the Time Set Button on the back of the unit for 3 seconds.

The TIME will flash on the display.

Press the + or – Buttons to set the correct time (hold for rapid adjustment).

Make sure to set the correct AM or PM time. (The PM indicator appears to

the right of the time display; there is no AM indicator.)

2. Press and release the Time Set Button to confirm the current time setting.

The YEAR will flash on the display. Press the + or – Buttons to set the correct

year.

3. Press and release the Time Set Button to confirm the current year setting.

The DATE will flash on the display. Press the + or – Buttons to set the correct

month and day (hold for rapid adjustment).

4. Press and release the Time Set Button to confirm the current date setting.

Two beeps will sound to indicate time setting mode is complete.

NOTE: The display can be set to standard 12 hour time (AM and PM) or to

24 hour time. To toggle between 12 and 24 modes, press and release the

Alarm or Alarm Button located on top of the unit at any time while

display is flashing during manual time setting mode.