Si-B62 Eng IB Size: 153mm x 120mm Printing color: Black June 6, 2014 P1 Si-B62 Bluetooth FM Clock Radio with USB Charging instruction manual
P2 Si-B62 Introduction P3 Si-B62 FCC Information FCC Radiation Exposure Statement FCC ID: EMOSIB62 IC: 986B-SIB62 Thank you for purchasing the iHome Si-B62. This product is designed to provide high quality wireless sound from your iPad, iPhone, iPod or other Bluetooth audio device. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
P4 Si-B62 Table of Contents Meet Your Si-B62 ....................................................................................................................5 The Display/Setting Up the Unit .................................................................................................6 Replacing and Installing Clock Backup Batteries ............................................................................7 Setting the Clock/ FM Radio .............................................................
P7 P6 Meet Your Si-B62 Si-B62 Top Using the The Display Si-B62 Sleep Button Tuning Up Button Volume Up/Alarm 1 Button Clock/Preset button Tuning down Button Volume Down/Alarm 2 Button Power/Mode Button Pairing Button Bottom Snooze/ Dimmer Button PM Indicator Alarm 1 Indicator Radio FM Indicator Alarm 2 Indicator Bluetooth Pairing Indicator AUX-IN Indicator Alarm Buzzer Indicator Battery Low Indicator Back Setting Up the Unit Aux-in Jack USB Charging Port DC Jack DC Connect the includ
P8 Replacing and Installing Clock Backup Batteries Using the Si-B62 Note: 2 AAA batteries are included with the unit. Install them before using the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is out.
P10 Using the P11 Si-B62 Using the Si-B62 Setting and Using FM Presets Setting and Using the Alarms The unit allows you to store up to 10 FM radio station presets 1. Press and release the Power/Mode Button as needed until the FM indicator icon and current FM radio frequency appear on the display. 2. Press the – or + Buttons to tune the radio to the desired station (hold to scan for the next clear station). 3.
P12 Using the P14 Si-B62 Using the Si-B62 Snooze/Dimmer Button Using Bluetooth Pairing Your Device 1. While the alarm is sounding, press and release the Snooze/Dimmer Button to temporarily silence the alarm for 9 minutes. Snooze can be used several times during alarm. 2. To adjust the brightness of the display from high to low, press and release the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 1.
P16 P15 Using the Si-B62 Playing Audio Via Bluetooth 1. Press and release the Power/Mode Button as needed until the Bluetooth indicator icon appears on the display. 2. Adjust the volume output on your device to at least 50%. Press the Button on the unit to play audio from your linked Bluetooth device. 3. Press the or Buttons to adjust the volume on the unit. 4. When done listening, press and hold the Power/Mode Button to turn the unit off.
P17 Troubleshooting Unit doesn’t respond • • • • Check that all connections are correct and properly plugged in. Only use the AC adaptor that came with the unit Make sure your device is properly paired with the Si-B62. Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) • The unit may need to be reset. To do so, unplug the unit from power source and remove the backup batteries. Let unit stand for 2 minutes. Re-install backup batteries and connect unit to power source.
P19 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
