RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This symbol is intended to alert the user of the presence of insulated dangerous voltage within the product's enclosure that moy be of sufficient magnitude 10 constitute a risk of electric shock.
A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS&—" This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire hazards. Please read al the safety and operating instructions carefully before installation and use. Keep these instructions handy for future reference. Take special note, adhere to all warning, and always follow the instructions on the unit and in the instructions and service manuals. Min. 4 fmm 1.
FCC Warning This device complies with Part 15.of the FCC Rules, Operation is subject to the following two conditions: (1) This device may net cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This-equipment has been tested and found fo comply with the limits for a Class B digital device, pursuant fo Part 15 of the'FCC Rules.
Installation Note: Read through the Maintenance section then plug the AC line cord correctly into a wall outlet. When the unit is connected to| AC power the display back-lit will be lighted up. Clock Backup Battery if the Backup Batteries have been installed and a power failure occurs or the AC cord is accidentally disconnected, the current time and alarm time settings will be maintained.
Setting Date | 1. Press the Date Button which is located at the top of unit and holding for 2 seconds. The display will change to show day and flashing. 2. Press the << Button to select correct day, >> year. mutton for month and 7.5.2 Button for 3. Press the Date Button again or wait for about 7 seconds will return to normal operation mode. 1 Important — It is important to set the correct date to coincide with the 7.5.2 (Everyday, Weekday, Weekend) alarm settings (see Setting the Alarm Times).
Confirm the Alarm Times To recheck or confirm the alarm time settings at twice. The display will change from current time any time, press the Alarm Set Button to radio alarm and buzzer alarm time. Press the Alarm Set Button again or wait for 7 seconds then display will return to current time. Listening / Sleep to Radio Note: Extend FM wire antenna fully for best FM rex best AM reception. 1. 2. 3.
Care and Maintenance If required, the cabinet may be cleaned with a soft cloth slightly dampened with a mild soap and water solution. Disconnect the AC cord before cleaning ‘and never allow any liquid to get inside ‘the cabinet. Do not use:any harsh detergents or abrasive cleaners as S these may mar the surface of your radio. Note: When the unit is di connected for cleaning, if there is no back up battery installed, the time and alarm, Settings, will be lost and.
Limited 90 Day Warranty Timex Audio Products; Division of SDI Technologies Inge, warrants this product to be free from defects in workmanship and material under normal underestimation for a period of 90 days from the date of original purchase. Should service be required by reason of ary defect or malfunction, it is best to first: rectum this product and all parts there of, to the store where it was originally purchased.
